lov2flyrc

My Feedback: (24)

We are pleased to announce our latest release in the Pro-Link line of trailing link struts.

Our Pro-Link Bandit and Bandit ARF struts have been designed from the ground up specifically for the Bandit. Throughly tested and BVM approved, These trailing link struts are ideal for both paved and grass runway operation. Direct, no modification replacement for BVM's Duro-Struts, fits BVM wheels and brakes.
The Pro-Link Bandit struts are available now through Dreamworks Model Products and BVM Jets.
http://dreamworksrc.com/catalog/prod...oducts_id=1330

We expect to release several new Strut Sets, in addition to our new Retract line over the next few weeks.....

Sets currently in production:
Elan
BVM Bobcat
BVM Kingcat

Sets currently in prototype phase:
Lightning
Flash
Eurosport

Also newly released, the Jettech Boomerang Intro ER (extended range) Fuel Cell. Carries 88 oz and fits with no modifications required. http://dreamworksrc.com/catalog/prod...oducts_id=1333

We greatly appreciate your support and patronage!
Todd

Jet-1A

Hi,

we are also pleased for this information, that's is a very good copy from our legs JET-1A.

Normaly you can find it only in China.


Best regards

Jet-1A Team

BirdofpraY

My Feedback: (31)

I don't know about a copy but, they sure look good... I like that they are 1/2" instead of pined...

rcguy!

My Feedback: (69)

Todd,
Will the Elan struts require grinding out the retract mounting area?

Dave

lov2flyrc

My Feedback: (24)

Absolutely not Dave... They are of almost zero offset in the extended position with 1/2 trunion style capture, no pin connections!
Our Pro-Link retracts will fit the Elan without any grinding of the frames.

Regards,
Todd

digitech

My Feedback: (10)

well they are copy,s , anything jet-1a makes Dreamworks copies it.
normally i would say that is a compliment....
sadly all this stuff he is offering or will be having was allready done by Jet-1a.
he should make something original , we had bandit struts months ago...
Eurosport , kingcat all done..

George

My Feedback: (57)

"Hi,

we are also pleased for this information, that's is a very good copy from our legs JET-1A.

Normaly you can find it only in China.


Best regards

Jet-1A Team"

"well they are copy,s , anything jet-1a makes Dreamworks copies it.
normally i would say that is a compliment....
sadly all this stuff he is offering or will be having was allready done by Jet-1a.
he should make something original , we had bandit struts months ago...
Eurosport , kingcat all done.."

vetagator

My Feedback: (5)

Your right george!!! This thread has been jacked [>:]

I think everybody knows how you feel Digi, and I don't think many people care any more. Your beating a dead horse.

George

My Feedback: (57)

You mean like THIS?

BirdofpraY

My Feedback: (31)

George your too funny [sm=lol.gif]... it's amazing now knowing the truth of all this... Just keep bringing the Imperial sizes to the market Todd...

figueroa

My Feedback: (22)

I think a strut price war is what we need here.
LOL

lov2flyrc

My Feedback: (24)

All of our Pro-Link products are CAD engineered and fabricated in the USA, NOT "copied" regardless of what others may insinuate.

For the record, we attempted to work with Sandor and Jet-1A products late 2006 / early 2007. This is not the place to hash out our reasons for severing our business relationship with them however, I am happy to provide that information with anyone whom finds it of any importance.

Thank you...

George

My Feedback: (57)

The TRUTH shall set you free!!!!

joeflyer

My Feedback: (48)

Todd,

Please show the strut dimensions on your website. I may be interested in these for another application.

lov2flyrc

My Feedback: (24)

Sorry guys, should have put this up already! See below...
Regards,
Todd

ghost_rider

My Feedback: (20)

This is a new product announcement thread from Dreamworks and should remain so. I just deleted unnecessary posts here and would caution that they not be repeated. If you have anything contrary to contribute, please open your own thread and do so.

Thanks in advance for your understanding.

Airforce7

My Feedback: (31)

Todd,

The new strut length is perfect for use with my Rookie II w/ Robart 630 retract units. I'd like to know if I can use the Intairco wheel/brake hub on this strut and weather or not a 1/4" axle option can be added instead of the 3/16". Same goes for the Elan strut in development, what is the overall length?

Thanks!

Ken

Dave Wilshere

Todd

Looking forward to getting these and the new sets to go with our present stock

regards

Dave

lov2flyrc

My Feedback: (24)

Ken,
I have a strut package for the Rookie II that fit perfectly into the robart 630's. They are compatible with the Intairco wheels and I can only assume you are looking to use 3" or larger with the need for 1/4" axle? I would be happy to modify a set in-house for your specific needs at no additional charge. Suggest you give me a call to discuss.
386-852-4793


Dave,
Will contact you via email
Regards,
Todd

KC36330

if only they'd of released it a week ago, i just got the 75oz in from you two days ago., i'm also glad to see the BVM fitting has dropped $2 in price with it not including a clunk

lov2flyrc

My Feedback: (24)

Welcome to return the standard intro tank for the ER (Unused condition of course) tank if desired? Just let me know...
From now on, all tanks will include a super-clunk and tygon line if purchased with the O-ring style fittings.
Todd

mr_matt

My Feedback: (10)

Great work Todd and congrats on the BVM collaboration!

Will these same struts work in a BobCat ARF?

Regards,

Airforce7

My Feedback: (31)

Todd,

My ideal trailing link strut is this; I have a preexisting cut out in my Rookie for the Robart straight strut. Total length of the strut is 5.25" long to the center of the axle. I use 3.25" diameter Intairco wheels/brakes. I want a near straight trailing link strut for Robart 630 units to fit the opening with minimal cutting of the fuse bottom without having to by another set of wheels. I don’t want to enlarge the opening in the fuse I’ve already got there now.

Digitech pulled it off with the Jet 1A struts for the Elan, but the strut uses pins and funky wheels and it may be to long. Will your Elan Pro-link struts be similar, but also be compatible with Intairco wheels/brakes?

I once bought the Jet 1A struts from you when you first got them and they where really nice. Turned out that they where to long and the axle was way to much off center, which would have left a large cut out on the bottom I did not want. I sent them back…

Ken

KC36330

I've already installed the tank and it would be more trouble then worth to swap them out, but if you feel so kind as to send me that clunk I'd be appreciative, i had to steal the one from my startup tank and haven't a replacement as of yet.

joeflyer

My Feedback: (48)

Todd,

Is the shank diameter .40" or .50"? The picture with dimensions shows .40 but you mentioned 1/2 in your earlier post.