Its finished! - and its out'a here!
#1
Thread Starter

My Feedback: (24)
Well... it took 3 years, but I finally finished Joe C's new ride. Jetcat P-180, operating canopy, full lights, chute, both inner and outer pylos can drop ordinance, plated in real aluminum. It came out at 42 lbs dry and the CG is 7/10 in. forward of recommended, so a couple of oz. in the tail should fix that. Its on its way as soon as the packing foam shows up...
Bob
Bob
#18
Thanks, it has been worth the wait, the F-100 looks awesome, thanks Bob. Ron, we will have to have both our jets together soon, the metal finish looks fantastic.
Joe C!!
Joe C!!
#23
Thread Starter

My Feedback: (24)
Thanks for the complements guys. I'm very happy with how it came out (and that its done
). It will look good next to the metal morphed F-86, but please keep in mind that very, very, very few people are as talented as Greg! 
Don, you know, its a good thing that its Joe's airplane because as I set it down on the driveway to take the pictures I realized that I had finally build my first airplane that I wouldn't be able to convince myself to fly... [X(]
Bob
). It will look good next to the metal morphed F-86, but please keep in mind that very, very, very few people are as talented as Greg! 
Don, you know, its a good thing that its Joe's airplane because as I set it down on the driveway to take the pictures I realized that I had finally build my first airplane that I wouldn't be able to convince myself to fly... [X(]
Bob



