Cessna Citation II kit ?
05-19-2008, 03:59 AM
#1
Member
Thread Starter
Join Date: Sep 2005
Location: Slagelse, DENMARK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Cessna Citation II kit ?
Is anybody in forumland aware of any kits or arf's for a cessna citation II
somewhere around 2000-2400 mm, 6-8 Kg. preferrably with retracts.
I KNOW about the royal kit, not being produced anymore, and it's too small anyway
- and the somewhat larger that have been seen flying at jet events in the USA - and it's too large.
Kenneth
somewhere around 2000-2400 mm, 6-8 Kg. preferrably with retracts.
I KNOW about the royal kit, not being produced anymore, and it's too small anyway
- and the somewhat larger that have been seen flying at jet events in the USA - and it's too large.
Kenneth
10-09-2008, 08:44 PM
#2
Join Date: Nov 2006
Location: St. Clair,
MI
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
RE: Cessna Citation II kit ?
Purchase a set of plans and have them blown-up to the desired size than let LAZER LIZARD cut the componenants. I my be willing to part with the plans that I have as I'm almost finished building mine.
Best regards,
Terry
Best regards,
Terry
10-12-2008, 09:27 AM
#3
Member
Thread Starter
Join Date: Sep 2005
Location: Slagelse, DENMARK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
RE: Cessna Citation II kit ?
No need, picked mine up yesterday, after 1000 km driving 
'
This plane is NOT prepared in any way, except for elevator mounting.
This means that all formers, etc. must be made, with an eye to jetpower.
Elevators, enginepylons, and rudder are balsa over foam.
Fuselage, and Engine pods are FG
Wings are bare foamcores.
Total weight - so far - is 2400 grams
'This plane is NOT prepared in any way, except for elevator mounting.
This means that all formers, etc. must be made, with an eye to jetpower.
Elevators, enginepylons, and rudder are balsa over foam.
Fuselage, and Engine pods are FG
Wings are bare foamcores.
Total weight - so far - is 2400 grams
