Boomerang Nano!!!
#1301
Senior Member
Join Date: Apr 2006
Location: RUGBY, UNITED KINGDOM
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
RE: Boomerang Nano!!!
Traxxas, BaldEagle and GooseF22,
Thanks for your replies. Colin from boomerang jets sorted me out with a spare white cover which i have painted and fitted tonight. Not sure if i will get to fly tomorrow as the weather looks poor.
Thanks for your replies. Colin from boomerang jets sorted me out with a spare white cover which i have painted and fitted tonight. Not sure if i will get to fly tomorrow as the weather looks poor.
#1304
Banned
Join Date: Jul 2004
Location: England, , UNITED KINGDOM
Posts: 2,725
Likes: 0
Received 1 Like
on
1 Post
RE: Boomerang Nano!!!
ORIGINAL: Dblex
Will this hold a kingtech K80?
Will this hold a kingtech K80?
Dennis
#1305
Member
Join Date: Jun 2009
Location: , ESTONIA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
RE: Boomerang Nano!!!
Maidened my Nano today.Jetcat P60, digitech oleos,FCT 2.6L tank and some cheap retracts.
Take off from grass field in ca 20-30meters, needed some up trip with full tank, after that flew practically hands off straight and level.
Landings were also pretty easy. Special thanks to Dave Wilshere, who's help was invaluable for getting my P60 to run again.
Ivar
Take off from grass field in ca 20-30meters, needed some up trip with full tank, after that flew practically hands off straight and level.
Landings were also pretty easy. Special thanks to Dave Wilshere, who's help was invaluable for getting my P60 to run again.
Ivar
#1306
Banned
Join Date: Jul 2004
Location: England, , UNITED KINGDOM
Posts: 2,725
Likes: 0
Received 1 Like
on
1 Post
RE: Boomerang Nano!!!
ORIGINAL: ikoppel
Maidened my Nano today.Jetcat P60, digitech oleos,FCT 2.6L tank and some cheap retracts.
Take off from grass field in ca 20-30meters, needed some up trip with full tank, after that flew practically hands off straight and level.
Landings were also pretty easy. Special thanks to Dave Wilshere, who's help was invaluable for getting my P60 to run again.
Ivar
Maidened my Nano today.Jetcat P60, digitech oleos,FCT 2.6L tank and some cheap retracts.
Take off from grass field in ca 20-30meters, needed some up trip with full tank, after that flew practically hands off straight and level.
Landings were also pretty easy. Special thanks to Dave Wilshere, who's help was invaluable for getting my P60 to run again.
Ivar
Dennis
#1307
RE: Boomerang Nano!!!
ORIGINAL: ikoppel
Maidened my Nano today.Jetcat P60, digitech oleos,FCT 2.6L tank and some cheap retracts.
Take off from grass field in ca 20-30meters, needed some up trip with full tank, after that flew practically hands off straight and level.
Landings were also pretty easy. Special thanks to Dave Wilshere, who's help was invaluable for getting my P60 to run again.
Ivar
Maidened my Nano today.Jetcat P60, digitech oleos,FCT 2.6L tank and some cheap retracts.
Take off from grass field in ca 20-30meters, needed some up trip with full tank, after that flew practically hands off straight and level.
Landings were also pretty easy. Special thanks to Dave Wilshere, who's help was invaluable for getting my P60 to run again.
Ivar
Good news, plenty of aileron expo and the Nano rocks! One of my favourite toys.
You can build an UF now
Dave
#1308
Member
Join Date: Jun 2009
Location: , ESTONIA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
RE: Boomerang Nano!!!
some phone and gopro videos
http://www.youtube.com/user/Marek344.../1/N11YHWT9H7k
http://www.youtube.com/watch?v=2tdQwDXocOg
the best effect is the change in engine noise around 1:09 ..
http://www.youtube.com/user/Marek344.../1/N11YHWT9H7k
http://www.youtube.com/watch?v=2tdQwDXocOg
the best effect is the change in engine noise around 1:09 ..
#1309
RE: Boomerang Nano!!!
I really enjoyed the Nano/Wren 70 combo. It was alot of fun... so much fun that my buddy flew it yesterday, and how he owns it
Dave, Now I need also to fly the UFlash...
Dave, Now I need also to fly the UFlash...
#1311
RE: Boomerang Nano!!!
This is probably going to sound like a really stupid question but...............
How do you route the tie wraps to hold down the fuel tank? Are you wrapping them around the tank or just over the top to hold the tank down. The kit has holes in the little side formers but nothing on the bottom to actually hold the tank down.
How do you route the tie wraps to hold down the fuel tank? Are you wrapping them around the tank or just over the top to hold the tank down. The kit has holes in the little side formers but nothing on the bottom to actually hold the tank down.
#1312
RE: Boomerang Nano!!!
ORIGINAL: siclick33
This is probably going to sound like a really stupid question but...............
How do you route the tie wraps to hold down the fuel tank? Are you wrapping them around the tank or just over the top to hold the tank down. The kit has holes in the little side formers but nothing on the bottom to actually hold the tank down.
This is probably going to sound like a really stupid question but...............
How do you route the tie wraps to hold down the fuel tank? Are you wrapping them around the tank or just over the top to hold the tank down. The kit has holes in the little side formers but nothing on the bottom to actually hold the tank down.
If its the jet tech, velcro the bottom of the tank and expoxy some zip tie downs on the end of the tank. there are pics of it back in this thread.
#1313
RE: Boomerang Nano!!!
I am using the Dubro 50 ounce at the moment.
Where do you criss cross the straps? The instructions say not to rely on the floor but I can't work out how you can get the straps through the side formers and under the floor.
Where do you criss cross the straps? The instructions say not to rely on the floor but I can't work out how you can get the straps through the side formers and under the floor.
#1315
Member
Join Date: Jun 2009
Location: , ESTONIA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
RE: Boomerang Nano!!!
Crashed my nano last friday. During my second flight of the day it behaved strangely - a lot of pitch inertia, like flying with ca 100% expos, and stalled at the final turn:
Everything seems to be OK expect the nose..
Last picture shows my new "hybrid" version..
Everything seems to be OK expect the nose..
Last picture shows my new "hybrid" version..
#1316
My Feedback: (106)
RE: Boomerang Nano!!!
OK Guys.
I'v seen more than one post with folks wrestling with this problem in their Nano. Here's an easy fix. Forget all those combersome wire ties and the cris cross way ya have to do that. See those little white hooks in the first photo? CA some small Pc's of 1/8" ply under the cross braces at the point you will screw the hooks in. Drill you some holes smaller than the hook threads and soak the holes after you have threaded/removed them in with CA. Screw the hooks in and soak them again. Them rubberband away. Use as many bands as you need. I use this in 89% of all my builds. Even in 35% 3D prop machines. The tank will not move.
Hope this helps
I'v seen more than one post with folks wrestling with this problem in their Nano. Here's an easy fix. Forget all those combersome wire ties and the cris cross way ya have to do that. See those little white hooks in the first photo? CA some small Pc's of 1/8" ply under the cross braces at the point you will screw the hooks in. Drill you some holes smaller than the hook threads and soak the holes after you have threaded/removed them in with CA. Screw the hooks in and soak them again. Them rubberband away. Use as many bands as you need. I use this in 89% of all my builds. Even in 35% 3D prop machines. The tank will not move.
Hope this helps
#1317
My Feedback: (106)
RE: Boomerang Nano!!!
How sweet it is. I maidened my Nano today and all was as good as everyone here said it would be. I love the way it handles. Like another post stated, I was sensitive on ailerons even on low rate with 35% Expo. I will cut that throw back go up on the expo. Not sensitive enough on Elevator on low rates so I will turn that up a notch. A few all through this thread stated the factory gear blocks were jello and they are. I made a fairly smooth landing and one block come loose. It didn't rip it out but I didn't want to taxi it back for fear it would come through the top of the wing. I will fix that before going back out. I have a Wren 44 Man. start that does real well in it but I would still like to see what it would do with a Man. start gold in it. Ha. All in all, I'm gonna love flying this bird. I would like to put Elec retracts and main brakes on it but than it would be heavyer so will give that some thought. Thanks for all the help on this thread guys. Roy
#1318
Banned
Join Date: Jul 2004
Location: England, , UNITED KINGDOM
Posts: 2,725
Likes: 0
Received 1 Like
on
1 Post
RE: Boomerang Nano!!!
ORIGINAL: hooker53
How sweet it is. I maidened my Nano today and all was as good as everyone here said it would be. I love the way it handles. Like another post stated, I was sensitive on ailerons even on low rate with 35% Expo. I will cut that throw back go up on the expo. Not sensitive enough on Elevator on low rates so I will turn that up a notch. A few all through this thread stated the factory gear blocks were jello and they are. I made a fairly smooth landing and one block come loose. It didn't rip it out but I didn't want to taxi it back for fear it would come through the top of the wing. I will fix that before going back out. I have a Wren 44 Man. start that does real well in it but I would still like to see what it would do with a Man. start gold in it. Ha. All in all, I'm gonna love flying this bird. I would like to put Elec retracts and main brakes on it but than it would be heavyer so will give that some thought. Thanks for all the help on this thread guys. Roy
How sweet it is. I maidened my Nano today and all was as good as everyone here said it would be. I love the way it handles. Like another post stated, I was sensitive on ailerons even on low rate with 35% Expo. I will cut that throw back go up on the expo. Not sensitive enough on Elevator on low rates so I will turn that up a notch. A few all through this thread stated the factory gear blocks were jello and they are. I made a fairly smooth landing and one block come loose. It didn't rip it out but I didn't want to taxi it back for fear it would come through the top of the wing. I will fix that before going back out. I have a Wren 44 Man. start that does real well in it but I would still like to see what it would do with a Man. start gold in it. Ha. All in all, I'm gonna love flying this bird. I would like to put Elec retracts and main brakes on it but than it would be heavyer so will give that some thought. Thanks for all the help on this thread guys. Roy
This certainly is a nice little jet and in my view very good value for money. I have about 40 flights on mine now with a Wren 44 gold
Dennis
#1320
Senior Member
My Feedback: (1)
Join Date: Feb 2008
Location: Surrey, BC, CANADA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
RE: Boomerang Nano!!!
Just got one of these last week Patricia is a great lady to deal with.
Can't seem to find the pics etc of the eflite retracts install if anyone has or can point me in the right direction.
Thanks
New home for a pst600r I had kickin around it will be my winter jet.
Kevin
Can't seem to find the pics etc of the eflite retracts install if anyone has or can point me in the right direction.
Thanks
New home for a pst600r I had kickin around it will be my winter jet.
Kevin
#1323
Junior Member
My Feedback: (-2)
Join Date: Sep 2011
Location: Evansville, IN
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
RE: Boomerang Nano!!!
Could anyone out there that has flown the Nano and Sprint give some feedback on the flight differences. Coming from Giant Scale planes there is a big difference in size 30-35% and 35-40% and there flying qualities. My options will be Nano and Wren 44 and Sprint and a K80.
#1324
RE: Boomerang Nano!!!
I am not qualified to comment on the Nano not having flown one, but your experience in giant scale will tell you that bigger is easier, the turbines for the Sprint are in general in the middle range of turbines and is more usable in many other types of airframe, personally I would go with the new JetMunt or JetCat 100, even more usable in other airfames in the future.
Mike
Mike
#1325
Senior Member
My Feedback: (1)
Join Date: Feb 2008
Location: Surrey, BC, CANADA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
RE: Boomerang Nano!!!
Just fitting eflite retracts to the nano,thanks Dave anybody fit brakes to them here in Canada we gotta have Em. I'm tryin to keep it simple and light.
Kevin
Kevin