To further serve my customers needs, I will be bringing in additional stock selections on Hitec servos. Since I dont personally use Hitec, can you guys fill me in on which models (current) you would like to see us stock for jet applications.
TIA,
Todd

I would carry as much of the digital line as you can Todd. 7955's are the flagship high torque servo, 5125's for the thin wing apps, 5625 and 5645 for mid range stuff. 225MG for valves and such, 5245 for micro stuff. Those are just a few, also I would carry as much of the coreless line as you can, 7985MG and such. This is great news Todd, thanks!

645's!!

I always find a need for these

Hey Todd! thats great news!

7955 and 5645 would be a must to have in stock!

...also some futaba 2.4 receivers would be nice

Todd, I actually placed an order on servos/2.4 Rx/hardware the other day and the 1st place I checked was your website. Bummer!
I ended up at the other jet place in Florida, but they didn't have all the goodies I needed (which you do carry).

Now I can truly place all my R/C related orders at your place.

Just got some 7989MG's, nice!!! Also got some 5245MG's.......very smooth for a MG!!!

Also, FYI, the HS5085 fits perfectly on the tail of the Jet Legend and Tamjets F-16, and for the nose gear steering of the JL F-16. A very useful servo!!!

HS-81's, HS-65's, entire digital line, coreless ones.. 645's,

Thanks for the info guys, should have inventory on these shortly! Futaba product line will follow soon as well...
Anything else you think I should be carrying that we dont currently offer, feel free to suggest!

5625 and 5645!! and the micro programmer HFP-10! I am using Hitec 5645 in all my Jets on all rudders, elevators, ailerons (F-22 scratch build with G-Booster 160, 15kg takeoff weight, and CARF-Eurofighter 19,8 KG, G-Booster 160) and never had any Problems so far using them!!

Really good products with very attractive pricing! Will try the new '7 series.

Futaba FAAST receivers, 14 channels and maybe the mid line (even the little ones, I can't get them at my local HS without a special orders, use them in the PF don't you know, foamys, radian, stuff like that)

Regards,

Wow I can't believe all of the requests for 5645's ..I don't know maybe I had a batch of bad ones however all of the ones I have I would consider to have a large amount of slop right out of the box...maybe I'm just being too fussy???

Now the 5955TG (now 7955)...that's a good servo!

The TG (titanium gear) servos can't be beat...

Don't bother with the HFP-10 micro programmer. The new '7' series digital servos have some new programmable options that the HFP-10 programmer will not be able to program. The new programmer is the HFP-20 and it will program the new '7' series digital servos and is backward compatible with all of Hitec's servo line.

I like the new 7955's.

Roy

Ok, Hitec servos are in stock, see [link=http://dreamworksrc.com/catalog/index.php?cPath=59_88_93]HERE[/link]
Did I miss any?

5645's?

Ordered, just not in yet :-)

645's

already listed!

http://dreamworksrc.com/catalog/prod...oducts_id=1319