Skymaster A-10
02-03-2010, 03:12 PM
#31
Join Date: Dec 2003
Location: Oudtshoorn, SOUTH AFRICA
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymaster A-10
Hi,
Anton just completed the maiden flight on the A10.
It was very dramatical with 1 engine flame out on take off!! But still the a10 kept flying with only 1 x K80E engine running. This was very incouraging to see and might set at easy some fears some customers may have regarding twins in general.
The prototype produced by R&D over 20Kg. But Anton convinced that it will be under 20Kg once produced by production facility.
Another 3 flights with both turbines running perfectly were completed. Model will now go back to R&D for scale details and final moulding.
Excellent flying Anton of 160m runway.
Regards
Morne
www.skymasterjet.com/a10maiden.wmv
Anton just completed the maiden flight on the A10.
It was very dramatical with 1 engine flame out on take off!! But still the a10 kept flying with only 1 x K80E engine running. This was very incouraging to see and might set at easy some fears some customers may have regarding twins in general.
The prototype produced by R&D over 20Kg. But Anton convinced that it will be under 20Kg once produced by production facility.
Another 3 flights with both turbines running perfectly were completed. Model will now go back to R&D for scale details and final moulding.
Excellent flying Anton of 160m runway.
Regards
Morne
www.skymasterjet.com/a10maiden.wmv
04-23-2010, 01:55 PM
#38
RE: Skymaster A-10
Hi, all
I just finished the the test flight the A-10 again, we will starting make the all scale details with penalline and rivets for A-10... I hope get the scale Landing gear from Likai as soon,
and the prototype of A-10 not an ARF PLUS version, the dry weight over 24kg (53lbs), I estimate the ARf PLUS Pro version will be under 20kg,,
http://www.skymasterjet.com/A-10testflight.wmv
Best Regards
Anton
I just finished the the test flight the A-10 again, we will starting make the all scale details with penalline and rivets for A-10... I hope get the scale Landing gear from Likai as soon,
and the prototype of A-10 not an ARF PLUS version, the dry weight over 24kg (53lbs), I estimate the ARf PLUS Pro version will be under 20kg,,
http://www.skymasterjet.com/A-10testflight.wmv
Best Regards
Anton
04-27-2010, 03:03 AM
#42
RE: Skymaster A-10
ORIGINAL: CraigG
Looks like that size should keep it under 55lbs.
Looks like that size should keep it under 55lbs.
when we products by ARF PLUS technologies that I hope the ARF PLUS A-10 wil be under 20kg (45lbs) dry weight , ....
05-29-2010, 03:58 AM
#43
RE: Skymaster A-10
Hi, All
I just got the L/G (Sample) for Skymaster A-10 from Likai Taiwan, i never seen the best L/G for the A-10 like this, i can not wait get the first product of L/G for A-10 from Likai again, I hope the time enough for display the A-10 with the scale L/G at Jet Power 2010..
I think that Likai has hit the homerun again............
http://www.skymasterjet.com/A10.wmv
my latest test flight video for A_10:
http://www.skymasterjet.com/a10seba.wmv
the Sebastiano Silvestri (Italy) has test flight the Skymaster A-10 prototype when he visited our factory,
I just got the L/G (Sample) for Skymaster A-10 from Likai Taiwan, i never seen the best L/G for the A-10 like this, i can not wait get the first product of L/G for A-10 from Likai again, I hope the time enough for display the A-10 with the scale L/G at Jet Power 2010..
I think that Likai has hit the homerun again............
http://www.skymasterjet.com/A10.wmv
my latest test flight video for A_10:
http://www.skymasterjet.com/a10seba.wmv
the Sebastiano Silvestri (Italy) has test flight the Skymaster A-10 prototype when he visited our factory,
05-30-2010, 09:34 PM
#46
Join Date: Jul 2007
Location: paso robles,
CA
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymaster A-10
Yes, being a true to scale fanatic of the A10, those look nice. Are the actuators going to be operable or for looks? Will you be doing some scale rims for it?
I guess after lookin at the rims a little better, i noticed the opposite side of the front with the spokes. Is that a cover? Mains look good.
chris
I guess after lookin at the rims a little better, i noticed the opposite side of the front with the spokes. Is that a cover? Mains look good.
chris
07-04-2010, 10:15 PM
#48
RE: Skymaster A-10
Hi, Kevin
Sorry , I still have no the prices yet, because the Likai still not offer the price for the scale L/G yet,
But , I would like let you know the mould of A-10 almost finish,
the first product of A-10 will release before end of 2010,
please wait a few month, that we will post the finilly prices on my website.
Best regards
Anton
Sorry , I still have no the prices yet, because the Likai still not offer the price for the scale L/G yet,
But , I would like let you know the mould of A-10 almost finish,
the first product of A-10 will release before end of 2010,
please wait a few month, that we will post the finilly prices on my website.
Best regards
Anton
07-08-2010, 06:57 PM
#49
My Feedback: (3)
Join Date: Jun 2004
Location: arlington, TX
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymaster A-10
I have to have one of these. May have to sell the Harley. No, wait... I was watching 'Breaking Bad. I'll become a chemist. Yeah! That's it... gotta run to the hardware store fellas.
08-30-2010, 02:59 AM
#50
RE: Skymaster A-10
Hi, all
when I see thousands of extrude rivets for the A-10, I think it's a mission impossible!!
But I think everything is worth for the rivets and details which took about 2 months time when the Mould is finished.
hope get the A-10 first product as soon.,
Best Regards
Anton
when I see thousands of extrude rivets for the A-10, I think it's a mission impossible!!
But I think everything is worth for the rivets and details which took about 2 months time when the Mould is finished.
hope get the A-10 first product as soon.,
Best Regards
Anton