RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Case for 12X (https://www.rcuniverse.com/forum/rc-jets-120/10329603-case-12x.html)

Jeffpro 02-11-2011 07:55 PM

Case for 12X
 
Can anybody recommend a good case for a JR 12X? I got one for Christmas and the case that comes with it is a poor fit. I tried what the addendum to the instructions recommended, but my antenna won't fold forward far enough for the lid to clear.

I am amazed that a transmitter of this quality comes with a case that doesn't fit.

Pitts S1S 02-11-2011 08:16 PM

RE: Case for 12X
 
Horizon carries a Sprectrum case that is like the old 10x case, the radio fits in sideways just fine.

Jeff

darryltarr 02-11-2011 08:27 PM

RE: Case for 12X
 
1 Attachment(s)
Jeff,

The original case is just fine. Simply adjust the slidable compartments arround and you it will fit your TX perfectly (even TWO if you want).

Rgds.


FIREWALL24 02-11-2011 09:29 PM

RE: Case for 12X
 
Hi,
You can really find good cases here:
http://www.skbcases.com
and also here:
http://www.gatorindustrialcases.com (see utility)
They are not exactly for RC transmitter but they have a huge selection of cases, maybe you can adapt one by modifying the foam interior.

I use a SKB golf case to carry my pylon planes. The quality is really good.
-Juan

trioval00 02-12-2011 05:30 AM

RE: Case for 12X
 
If you have a Lowes home center by you, you can get a case there as most of us have, 20-25 bucks for a good solid case.


Mark

hooker53 02-12-2011 05:31 AM

RE: Case for 12X
 
You can get a good one ever cheaper than Lowes, at Harbor Freight.

Jeffpro 02-12-2011 10:01 AM

RE: Case for 12X
 

ORIGINAL: darryltarr

Jeff,

The original case is just fine. Simply adjust the slidable compartments arround and you it will fit your TX perfectly (even TWO if you want).

Rgds.


Here's what I don't get. Your photo shows what the addendum to the manual shows. When I try it, the base section of my antenna won't go down far enough. It'll go to about 45 degress, and that's it. Even if you remove the foam from inside the lid, you can't close the case without potentially breaking the antenna. What am I missing? Has JR changed the amount of travel on the antenna or something?

darryltarr 02-12-2011 09:26 PM

RE: Case for 12X
 
1 Attachment(s)
Hi Jeff,

I have teken some more photos so hopefully they will help you to rearrange your case accordingly. On my DSX12 the antenna base is full forward to about a 70 degree angle, confirm yours only moves to 45 degrees.

The JR case also fits my Futaba 14MZ perfectly.

Good luck.

Rgds.


indubitably 02-13-2011 12:30 AM

RE: Case for 12X
 
I didnt have a case, so ordered a yellow case from Pellican. Waterproof, and foam filled. Big enough to put in charger and other accessories. Then some one sold me his 12X case, and im not using the Pellican. Its nice but a bit heavier. I could sell you my Pellican case. :D

Jeffpro 02-13-2011 05:04 PM

RE: Case for 12X
 


ORIGINAL: darryltarr

Hi Jeff,

I have teken some more photos so hopefully they will help you to rearrange your case accordingly. On my DSX12 the antenna base is full forward to about a 70 degree angle, confirm yours only moves to 45 degrees.

The JR case also fits my Futaba 14MZ perfectly.

Good luck.

Rgds.


Yep, mine won't fold forward far enough. I wonder if they've tweaked the design or something. Something isn't right.


All times are GMT -8. The time now is 03:15 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.