RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   On board volt meter - small, light and cheap (https://www.rcuniverse.com/forum/rc-jets-120/10348267-board-volt-meter-small-light-cheap.html)

i3dm 02-19-2011 01:14 PM

On board volt meter - small, light and cheap
 
Hey guys,

Check these out, i think they would make a great on board volt meter (small 43mm long and 13g weight) for our jet batteries:
http://cgi.ebay.com/Mini-Red-LED-Vol...item2a05538010

Similar units in the hobby world sell for 25$ + shipping, and these are 9$ shipped.

Enjoy ! :)

hooker53 02-19-2011 01:26 PM

RE: On board volt meter - small, light and cheap
 
Hey thats a good find. Thanks for posting this!!!! Roy

lookilook 02-20-2011 01:26 AM

RE: On board volt meter - small, light and cheap
 
Lior, i use 2 lipos through an emcotech switch, will this work you think? is it connected direct to the battery or y lead to the rx input?

i3dm 02-20-2011 02:06 AM

RE: On board volt meter - small, light and cheap
 
in your case i would Y lead 2 units off the batteries directly, to monitor actual battery voltage.

bigplumbs 02-20-2011 02:12 AM

RE: On board volt meter - small, light and cheap
 
More stuff to fit in................ Not a bad find though but dont you think we should be trying to take stuff out of our jets not putting it in.

Simple and light thats what I like

Regards

Dennis

lookilook 02-20-2011 02:34 AM

RE: On board volt meter - small, light and cheap
 
thanks Lior,
Dennis a i couldnt agree more..KISS keep it simple safe...

i3dm 02-20-2011 02:39 AM

RE: On board volt meter - small, light and cheap
 
Every componenet of our jet had its adcantafes and disadvantages - of course its something that could go bad (although probably unlikely) but it also gives you 100% battery monitoring. its your choice - thas the fun thing about this hobby. just thought i'd sahre the face you can buy a 9$ unit which is much nicer than the 25$+ units.
:D
\
BTW you could always wire up a proper connector to this unit and use it as a no load external voltage tester.

bigplumbs 02-20-2011 02:51 AM

RE: On board volt meter - small, light and cheap
 


ORIGINAL: i3dm

Every componenet of our jet had its adcantafes and disadvantages - of course its something that could go bad (although probably unlikely) but it also gives you 100% battery monitoring. its your choice - thas the fun thing about this hobby. just thought i'd sahre the face you can buy a 9$ unit which is much nicer than the 25$+ units.
:D
\
BTW you could always wire up a proper connector to this unit and use it as a no load external voltage tester.

No problem with you shareing. The item might be for some just not for me. It is also true that a bad battery can give a good volt reading that just goes when it is under load. So in some ways this could be a good thing if you move sever servos when you reaad it

Dennis

hooker53 02-20-2011 05:04 AM

RE: On board volt meter - small, light and cheap
 


ORIGINAL: bigplumbs



ORIGINAL: i3dm

Every componenet of our jet had its adcantafes and disadvantages - of course its something that could go bad (although probably unlikely) but it also gives you 100% battery monitoring. its your choice - thas the fun thing about this hobby. just thought i'd sahre the face you can buy a 9$ unit which is much nicer than the 25$+ units.
:D
\
BTW you could always wire up a proper connector to this unit and use it as a no load external voltage tester.

No problem with you shareing. The item might be for some just not for me. It is also true that a bad battery can give a good volt reading that just goes when it is under load. So in some ways this could be a good thing if you move sever servos when you reaad it

Dennis
I don't do just jets, but if this is too heavy for YOUR jets, Don't install one!!!!!!

Vinceyboy 02-20-2011 07:36 AM

RE: On board volt meter - small, light and cheap
 
This unit looks identical to the i4c C-Volt meter that came with their Servo Power Regulator, ideal on a small jet where you don't have a Powerbox or switch installed.

Dennis, you really need to build lighter mate:)

AndyAndrews 02-20-2011 07:39 AM

RE: On board volt meter - small, light and cheap
 
just bought one. $5 freight lol. but still seems like a good value.

Daleroger 02-20-2011 07:46 AM

RE: On board volt meter - small, light and cheap
 
Awesome find i3dm , Thank You.

bigplumbs, give us a break.

hooker53 02-20-2011 08:05 AM

RE: On board volt meter - small, light and cheap
 


ORIGINAL: Daleroger

Awesome find i3dm , Thank You.

bigplumbs, give us a break.
;);):D

bigplumbs 02-20-2011 08:33 AM

RE: On board volt meter - small, light and cheap
 


ORIGINAL: Vinceyboy

This unit looks identical to the i4c C-Volt meter that came with their Servo Power Regulator, ideal on a small jet where you don't have a Powerbox or switch installed.

Dennis, you really need to build lighter mate:)

I know Vince but with me being a fat git..... It is difficult :D

Dennis

bigplumbs 02-20-2011 08:35 AM

RE: On board volt meter - small, light and cheap
 


ORIGINAL: Daleroger

Awesome find i3dm , Thank You.

bigplumbs, give us a break.

Just a comment it the other direction. I would have thought people would be big enough to accept that. You obviously seem to have a problem with people seeing another side........... Chill

Vinceyboy 02-20-2011 08:56 AM

RE: On board volt meter - small, light and cheap
 


ORIGINAL: bigplumbs



ORIGINAL: Vinceyboy

This unit looks identical to the i4c C-Volt meter that came with their Servo Power Regulator, ideal on a small jet where you don't have a Powerbox or switch installed.

Dennis, you really need to build lighter mate:)
I know Vince but with me being a fat git..... It is difficult :D

Dennis

I know the problem Dennis old chap, it's a constant battle:D

Wclays 02-20-2011 09:38 AM

RE: On board volt meter - small, light and cheap
 
http://www.xtremepowersystems.net/products.php?cat=19

The TattleTale is a tiny and lightweight device that plugs into a empty receiver channel (or through a Y-cable). This device measures the input voltage and displays the lowest voltage threshold that was captured after being powered on. With a programmable acquisition time of 10ms to 100ms, even the shortest voltage sags can be detected!


This is super small and gives alot of infromation. I have found this very helpful with my jets and planes

Clay

FILE IFR 02-20-2011 09:50 AM

RE: On board volt meter - small, light and cheap
 

ORIGINAL: Wclays

http://www.xtremepowersystems.net/products.php?cat=19

The TattleTale is a tiny and lightweight device that plugs into a empty receiver channel (or through a Y-cable). This device measures the input voltage and displays the lowest voltage threshold that was captured after being powered on. With a programmable acquisition time of 10ms to 100ms, even the shortest voltage sags can be detected!


This is super small and gives alot of infromation. I have found this very helpful with my jets and planes

Clay

;)

At 1.75 grams, some may be against the high wing loading, 'extra baggage' their extremely heavy jets have to carry. :D Check the density altitude at your field before using these products. [8D]

Like Dennis said... "It's just more stuff to fit in".


All times are GMT -8. The time now is 10:51 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.