RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Finished! (https://www.rcuniverse.com/forum/rc-jets-120/10878372-finished.html)

Per Strommen 12-27-2011 01:20 PM

Finished!
 
1 Attachment(s)
Finally! It flew first in 2005, got inspired by Greg's thread recently.

Per Strommen 12-27-2011 01:23 PM

RE: Finished!
 
1 Attachment(s)
More

rhklenke 12-27-2011 01:26 PM

RE: Finished!
 
Nice! :D

No snow where you are yet, or are the pictures a few weeks/months old?

Bob

smchale 12-27-2011 01:26 PM

RE: Finished!
 
Very nice! Is it covered or painted?

Greg Wright 12-27-2011 01:28 PM

RE: Finished!
 
1 Attachment(s)
Very nice looks great!!!!

Per Strommen 12-27-2011 01:37 PM

RE: Finished!
 
Pictures taken today, slow winter so far. Mild westerly STRONG winds recently.
Colors are painted with acrylic base and 2k clear coat.
The FliteMetal aluminum tested my motivation, especially the sanding part. But I learned how to polish!!

Per Strommen 12-27-2011 01:46 PM

RE: Finished!
 
1 Attachment(s)
A few more

smchale 12-27-2011 01:50 PM

RE: Finished!
 
Did you pre-sand the FM to account for the panel lines or did you fill those before applying FM?
I agree about the sanding, it takes a lot of time but FM just doesn't look right without it or if it's not done enough to remove the orange peel look.

InboundLZ 12-27-2011 01:54 PM

RE: Finished!
 
Looks Great! Nice work, the effort paid off.

Per Strommen 12-27-2011 02:25 PM

RE: Finished!
 
smchale, I sanded the FM on the model. The panel lines were not altered, just matted carefully with a toothpick inside the paper(400)

Thanks for positive posts!

sideshow 12-27-2011 02:51 PM

RE: Finished!
 
Really beautiful job...inspiring me to get started on my T-33....

Lasse Palm 12-27-2011 03:07 PM

RE: Finished!
 
Looks really great!
Per, then we will hopefully see you on the Laxa jetmeeting in Sweden next year?

Regards
Kompisen...:D
Lasse P

hooker53 12-27-2011 03:33 PM

RE: Finished!
 
Per......very nice work.

rhklenke 12-27-2011 04:06 PM

RE: Finished!
 
Greg,

Are we going to get to see your Hun at Ky Jets?

All of these F-100 pictures are making me want to build another one... Perhaps in a few years when I have the $'s and time...

Bob

Greg Wright 12-27-2011 04:28 PM

RE: Finished!
 
Hi Bob, I haven't even given it any thought as it is still almost 7 months away. Also from the sounds of it there aren't any more hotels avalible for the event. Last i saw it was a 30mile drive to the next closest hotel and i'm not about to put an extra 60 miles a day of driving to get to and from a hotel. I will be at florida jets though.

Warbirdguy 12-27-2011 05:40 PM

RE: Finished!
 
1 Attachment(s)
Very nice :) I love the metal finish on an F-100. Just doesnt look right without it. Here is mine. Its long gone now but would do another in a heartbeat. Great job on yours. Im thinking of making the trip to KY jets this year.

WBG

Per Strommen 12-28-2011 05:38 AM

RE: Finished!
 
1 Attachment(s)
Takkar Lasse!

Will go to Laxa if my other hobby don't come in the way...

http://youtu.be/rAAMccvlEX4



Per

Per Strommen 12-28-2011 05:54 AM

RE: Finished!
 
Thanks Hooker53 and WBG:D
That "Minute Men" scheme looks great too! I chose the Thunderbrds primarily for the (hopefully) better visibility. Working on the ferry tanks for more area as well.

Per

dubd 12-28-2011 08:16 AM

RE: Finished!
 
Very nice job!

Lasse Palm 12-28-2011 08:57 AM

RE: Finished!
 

ORIGINAL: Per Strommen

Takkar Lasse!

Will go to Laxa if my other hobby don't come in the way...
Per, make sure that you're free first weekend in may....:-)
Fly J-28 Vampire, can you do rest of the summer;)

Lasse P

JoeEagle 12-28-2011 07:06 PM

RE: Finished!
 
Greg..

just called Hampton Inn directly and got a queen room non-smoking for 11-15th. they still have some smoking rooms available-call em!


All times are GMT -8. The time now is 08:31 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.