|
T-one Hawk mini
24 Attachment(s)
It looks like T -one is coming out with a hawk mini. It looks to have a ton of scale details including slotted flaps, rivet lines, dual nose gear doors controlled by one servo as well as dual main gear doors controlled by one servo. Plus it has electric retracts, I am not personally a fan air. Think I may give this one a shot. I talked to Dirk and I have a custom camo scheme in mind.
74.8 Length, 62.99 Wingspan Rated for K-60 to K-102 Max Weight 19.62lbs without fuel Tone |
That is a great size, Thank goodness!
|
Does anyone have one of these? Thinking about getting one.
|
Has T1 shared the all-in weight range? With ~62" wingspan, I'm curious to derive the potential wing loading. If it is light, it does look great.
|
I just got my mini Hawk in Tiger scheme. Looks great, lot's of detail and good paint/finish. It is PNP version, so I should have it ready in a week or so. Will post pictures.
does anyone else have one of these? |
Mine should be here soon hopefully. It's been a really long wait. I hope that it was worth it.
Tone |
Did you get the pnp option?
Tone |
I received mine and it looks really good. It is the pnp. https://cimg4.ibsrv.net/gimg/www.rcu...89ba9f9cd1.jpg
https://cimg5.ibsrv.net/gimg/www.rcu...328fd69deb.jpg https://cimg6.ibsrv.net/gimg/www.rcu...133808b877.jpg https://cimg7.ibsrv.net/gimg/www.rcu...ba38701280.jpg https://cimg8.ibsrv.net/gimg/www.rcu...c2573cb6e5.jpg https://cimg9.ibsrv.net/gimg/www.rcu...ad6e295cfe.jpg https://cimg0.ibsrv.net/gimg/www.rcu...1d2ddb5f9a.jpg https://cimg2.ibsrv.net/gimg/www.rcu...cfcff09385.jpg https://cimg3.ibsrv.net/gimg/www.rcu...2b31fd1079.jpg https://cimg4.ibsrv.net/gimg/www.rcu...d671f03ad4.jpg |
Originally Posted by Agrav8ed
(Post 12724102)
Did you get the pnp option?
Tone |
Originally Posted by N4S
(Post 12724187)
Yes, got the PNP. The E-Gear controller/sequencer looks like Xicoy LG15
Thanks, Tone |
Originally Posted by Agrav8ed
(Post 12724714)
I just have the kit version. Would you be willing to take a few pics for me. Primarily of how the rudder is mounted and the placement of the light controller. BTW, did you have to receive instructions on now to use the light controller?
Thanks, Tone https://cimg9.ibsrv.net/gimg/www.rcu...e06d4e87e0.jpg https://cimg2.ibsrv.net/gimg/www.rcu...20c0b4e33d.jpg https://cimg4.ibsrv.net/gimg/www.rcu...a26123a3e9.jpg |
Thanks for the reply but I already got mine built and ready to go. Found a couple of pics online and just made the rest up as I went along. It's a good kit. Solid and tons of scale detailed. Feels tad bit heavier than I would have thought but my build came out at the listed weight, 19.62 lbs. Tank empty, uat full.
Tone https://cimg2.ibsrv.net/gimg/www.rcu...760c7b7eda.jpg https://cimg4.ibsrv.net/gimg/www.rcu...6b225e42c2.jpg https://cimg5.ibsrv.net/gimg/www.rcu...3aad1d0135.jpg https://cimg6.ibsrv.net/gimg/www.rcu...c55e077de4.jpg https://cimg7.ibsrv.net/gimg/www.rcu...894904aa2d.jpg |
I've been looking at smaller jets recently and this one looks real nice. I talked with one pilot today at FIF who lost this one on maiden flight after flap deployment. Has anyone had any issues with this jet loosing pitch control with flap deployment? I have heard of Hawk type jets doing this before but I have never flown one.
Gary |
Originally Posted by Viper1GJ
(Post 12729452)
I've been looking at smaller jets recently and this one looks real nice. I talked with one pilot today at FIF who lost this one on maiden flight after flap deployment. Has anyone had any issues with this jet loosing pitch control with flap deployment? I have heard of Hawk type jets doing this before but I have never flown one.
Gary
Originally Posted by Agrav8ed
(Post 12729442)
Thanks for the reply but I already got mine built and ready to go. Found a couple of pics online and just made the rest up as I went along. It's a good kit. Solid and tons of scale detailed. Feels tad bit heavier than I would have thought but my build came out at the listed weight, 19.62 lbs. Tank empty, uat full.
Tone |
Originally Posted by N4S
(Post 12729937)
I had a Global Jet Club T-45 foamy. It crashed during maiden as I dropped the gears and banked left for a gear check prior to landing. I am not sure what caused the crash but one of my friends who was watching felt that I may have stalled it. I personally thought I had plenty of speed while making a gradual left turn.
Tone, would you please give us feedback regarding flight characteristics after your maiden flight? Thank, Tone |
Originally Posted by Agrav8ed
(Post 12729982)
My next few weekends are fairly busy but I hope to get the maiden done around the 17th of this month. I will reports back here how it goes.
Thank, Tone |
I have a K-100G1 and a K-60G1 that could use a new home, I wonder which would suit this plane best. My worry is that the 100 would be too portly and the 60 too gutless.
|
Originally Posted by luge_racer
(Post 12730120)
I have a K-100G1 and a K-60G1 that could use a new home, I wonder which would suit this plane best. My worry is that the 100 would be too portly and the 60 too gutless.
Tone |
Nice jet but I wonder what the wait would be? Like 4-6 months? Or 1-3 years? Way things are now with shipping from China to USA, 1-2k dollars? Just wondering. My buddy ordered a jet from BVM and it took like 6 months! And the shipping was outrageous.
|
I would reach out to Dirk at pacificrcjets.com. he will be able to give you the best estimate. I would speculate 3-4 months.
Tone |
Ordered a Micro and shipping was almost as much as the jet. That was just a few weeks ago, bad time to order anything.
|
Originally Posted by ledd4u
(Post 12730890)
Nice jet but I wonder what the wait would be? Like 4-6 months? Or 1-3 years? Way things are now with shipping from China to USA, 1-2k dollars? Just wondering. My buddy ordered a jet from BVM and it took like 6 months! And the shipping was outrageous.
I can tell you right now that I wouldn’t order my BVM F-18 at the current price, I got mine on a BVM Black Friday special and consider myself lucky to have paid what I paid for it. I’m interested in this T-1 Mini Hawk though, it looks amazing and its an easy size to manage… but I have two other jets in front of it I need to finish and fly first before I order another one…. Or so I keep telling myself… |
Likewise. I own two T-1’s. Quality is awesome but I just can’t deal with the shipping prices from Asia. Ironically it’s only on these jets and hobby. Starting to wonder if it’s all a game. That’s why I am out. I will only pay when it’s available here in the United States. No more games. Not here in stock, not my problem.
|
FUNNY because I order. a Mirage from PJ (Dirk) and shipping to an US address was very reasonable ..the price of the Jet increase a bit from a year ago but nit that much..
|
| All times are GMT -8. The time now is 07:37 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.