2K matte clear done except bottom of fuse

https://cimg4.ibsrv.net/gimg/www.rcu...2034c2d65.jpeg

https://cimg7.ibsrv.net/gimg/www.rcu...1249f7dba.jpeg
Matte clear now done. Time to assemble and balance

https://cimg6.ibsrv.net/gimg/www.rcu...e1eafdf7f8.jpg

https://cimg2.ibsrv.net/gimg/www.rcu...5db4e94aac.jpg

https://cimg3.ibsrv.net/gimg/www.rcu...f159d85511.jpg

https://cimg8.ibsrv.net/gimg/www.rcu...fb2fb3c406.jpg

Impressive, good looking mean machine!!!

Rgds,
Gerald

Thanks Gerald, can’t wait to see it in the air. Few more things to and should be ready

https://cimg4.ibsrv.net/gimg/www.rcu...c284494a1.jpeg

A few hiccups delayed maiden til yesterday. 2 flights went extremely well with Mike D as the test pilot. The model is setup with tailerons and a small amount of aileron throw with the flaps configured as flaperons. The model has a great presence in the air and performed very well. After trimming a cortex demon was turned on and ended up with about 50% gain.
https://cimg8.ibsrv.net/gimg/www.rcu...9c8c0f347.jpeg

https://cimg1.ibsrv.net/gimg/www.rcu...b21cd32f4.jpeg

https://cimg0.ibsrv.net/gimg/www.rcu...cfc944273.jpeg