Futaba 9ZWC2 programming issue...
 

On the Futaba 9ZWC2 TX, how do you guys change the sensitivity / steping of dials (LD or RD)
when used as volume dials.
Thanks,

Yann

RE: Futaba 9ZWC2 programming issue...
 

Yann propably the wrong forum to get a quick ansewer... try ..........this one:

http://www.rcuniverse.com/forum/Futa...mid_125/tt.htm

Lee

RE: Futaba 9ZWC2 programming issue...
 

Thanks...

RE: Futaba 9ZWC2 programming issue...
 

Can you give more info on what you are trying to achieve? I'm not really sure what you are asking.

Will ATV/AFR not help?

RE: Futaba 9ZWC2 programming issue...
 

OK, Let's take an exemple.
Say you use F->E to compensate for trim changes when flaps are deployed.
You also choose RD dial as Trim Volume Setting to fine tune in flight the amount a compensation you need.
The question is, how do you set the persentage of compensation for one step of the dial.
By default, the range of adjustment is less than 10%. How do you change this ?

Yann