RCU Forums - f-16 assembly

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)

- - f-16 assembly (https://www.rcuniverse.com/forum/rc-jets-120/334762-f-16-assembly.html)

2fast4-u11

10-27-2002 09:14 PM

f-16 assembly

1 Attachment(s)

hi

one of my F-16, tail fin with .75 ounce cloth re-enforced with balsa makes a very light , strong and rigid rudder and fin assembly.

2fast4-u11

10-27-2002 09:25 PM

f-16 assembly

1 Attachment(s)

also some jigs make working on the f-16 a breeze the wings and flying stab practically line them selves up.

2fast4-u11

10-27-2002 09:26 PM

f-16 assembly

1 Attachment(s)

another picture of all the bulkheads in place with control rods leaves gobs of room to install up to a 5 1/2 fan and retracts

weght to this point with servos and battery pack 6 lbs and very very rigid wings are .75 glass cloth with a composite main spar

2fast4-u11

10-27-2002 09:27 PM

f-16 assembly

i welcome any feedback

Centralrchobbies

10-28-2002 12:04 AM

f-16 assembly

Not to sure about the pushrods you installed as might have some excess movement but at least pust some more reinforcement near the end of the pushrod tube. Rick

All times are GMT -8. The time now is 12:55 PM.