Seba's 3-AXIS Vectoring Mig Video
 

Enjoy> http://www.filippo-materazzi.it/seba-mig.wmv

RE: Seba's 3-AXIS Vectoring Mig Video
 

awesome!!! beautiful paint scheme!!! Is that the Comp Arf bird?

RE: Seba's 3-AXIS Vectoring Mig Video
 

not sure on that..> http://www.sebart.it/!-html/hot-news.htm

RE: Seba's 3-AXIS Vectoring Mig Video
 

ooooooooohhhhhhhhhhhh saaaaaawwwwwwweeeeeeeeeeeeettttttttttttttt

RE: Seba's 3-AXIS Vectoring Mig Video
 

Is this a single engine or a twin ? What engine ?

RE: Seba's 3-AXIS Vectoring Mig Video
 

Now he needs a smoke system, preferably with smoke off the wing tips.

RE: Seba's 3-AXIS Vectoring Mig Video
 

twin jetcats, looks like he may have 2- p-160s.

RE: Seba's 3-AXIS Vectoring Mig Video
 

WOW

...and it can do level flights too:)

I felt like I was watching a MAKS video

RE: Seba's 3-AXIS Vectoring Mig Video
 

I saw this bird in WJM2007, it is powered by twin P-160 with 1.5:1 thrust/weight ratio. Using two P-70 can just obtain 0.7:1 thrust/weight ratio, it is impossible to hover it.

RE: Seba's 3-AXIS Vectoring Mig Video
 

Hi

I confirm engines 2 P160 SE inside.
Plane is a Basic CARF , but completly modified on the rear part.

JPZ

RE: Seba's 3-AXIS Vectoring Mig Video
 

That is the most awesome thing I have ever seen in a scale model. The 5' hover took ball$ the size of churchbells. I really enjoyed the flatspins . Hey, how about the "COBRA" move. My hats off to you Sabastino. That is one impressive model with some awesome flying skills for sure. I'm saving that video in the favorites:D A++++++++++

Billy

RE: Seba's 3-AXIS Vectoring Mig Video
 

Wow, impressive! Much more so, than a 3-d prop hanger, I think... [8D] Thats no cheap airplane, for sure...

Edit --> Oh, I assumed it was the Fiber Classics kit. It is something different, apparently with a single P-160, as shown on his website...

Edited again per Gary B --> twin P-160s - Wow!

RE: Seba's 3-AXIS Vectoring Mig Video
 

Wow ! Truly special . Amazing plane , amazing pilot !:D

Marc

RE: Seba's 3-AXIS Vectoring Mig Video
 

Here is an install pic

RE: Seba's 3-AXIS Vectoring Mig Video
 

an eye wittness said he has 2 p-160s in that jet.. that would be about 80lbs of thrust, seems like a lot but that is a big jet.. maybe a comp-arf then he mods and paints them? video says it's a mig 29..

RE: Seba's 3-AXIS Vectoring Mig Video
 

Amazing !!! best jet flight of all time. Where is this pilot from ??

V..

RE: Seba's 3-AXIS Vectoring Mig Video
 

Seba is from Italy. He has been a past TOC pilot, top 10 F3A (pattern) worlds pilot, and one of the best freestyle pilots.

RE: Seba's 3-AXIS Vectoring Mig Video
 

I cannot imagine what that plane weighs? Does anyone know? Did it compete at the WJM? I assume they weight them.

The reason I say that is that the turbines are mounted so far aft, it is incredible. I can't imagine how he balanced it. Incredible flying too!

Also does anyone know if he modified the kit to make it a 9-13 fuse profile or did he stay with the 9.12 profile?

EDIT: A quick back of the envelope calculation from measuring my plane says he would need about 1.5-2 pounds of lead in the nose with all else being equal. Not so bad I guess

RE: Seba's 3-AXIS Vectoring Mig Video
 

In a word WoW move over hotshots a new champion is crowned.
Simply the most amazing RC Jet demonstration that I have ever seen very nice video.:D

P. Richards aka Swat Team

RE: Seba's 3-AXIS Vectoring Mig Video
 

Simply AMAZING!!!!![X(]

RE: Seba's 3-AXIS Vectoring Mig Video
 

He waited till the end of the demo to do that veritcal hover and climb out, i assume it works better after some fuel is burned off.

V..

RE: Seba's 3-AXIS Vectoring Mig Video
 

I want a thrust vector for my Rhino. Who makes it?

RE: Seba's 3-AXIS Vectoring Mig Video
 

Andy

The vector thrust units are in the JetCat catalogue. I saw this plane flying at WJM and it was as good as it looks in the video. Also it is worth looking at the full size Mig 35 demos in Youtube. Vector thrust demos by highly skilled model jet pilots in Europe is a fast developing art. There were a pair of J10 aircraft at JetpPower that were able to do a more convincing hover and rotate through 360 degrees only a few feet above the ground. Also Wolfgang Kluhr did a similar demo with his Rookie rotating through 360 degrees.

John

RE: Seba's 3-AXIS Vectoring Mig Video
 

Incredible!! the video inspired me to get my mig back into the air again. Going to swap out the 120s and install the 160SE with Todd's thrust vectoring. Hopefully to get it ready for Sincity Jet.

http://www.rcuniverse.com/forum/m_12...tm.htm#1203068

RE: Seba's 3-AXIS Vectoring Mig Video
 

This is where I ordered my thurst vectoring system for my Rookie II/P120, looks quite the same...

http://www.stukerjurgen.de/Englisch/home_EN.htm Scroll down the page...or go to Online-Shop for details...

Works nice in my Rookie. Good quality.

RE: Seba's 3-AXIS Vectoring Mig Video
 

AWESOME plane and pilot!!!!!

RE: Seba's 3-AXIS Vectoring Mig Video
 

The dry weight of this plane is under 20kg (rule of WJM2007). But no matter thrust/weight ratio or total thrust they are all illegal under US AMA rule.

RE: Seba's 3-AXIS Vectoring Mig Video
 

Hi Likai,

When you say it is illegal under AMA rule do you mean the turbine thrust of are you speaking of rule 13 of the AMA regulations? Thanks Aman

RE: Seba's 3-AXIS Vectoring Mig Video
 

Man, just when you think pilots cant make their planes anymore amazing something like this comes around. That is probably the most amazing flight I have seen on a jet so far. I cant wait to see who raises the bar above that!!!!!

RE: Seba's 3-AXIS Vectoring Mig Video
 

I think the SM Harrier might rank up there with this one when it comes out. The video of the Mig is really awesome!

RE: Seba's 3-AXIS Vectoring Mig Video
 

I agree, if the SM Harrier ever comes out, and it will have to do VTOL to top that!!!

RE: Seba's 3-AXIS Vectoring Mig Video
 

A couple of links of the full scale.
http://www.liveleak.com/view?i=d828c8fa9d
http://www.liveleak.com/view?i=b39_1175488578

RE: Seba's 3-AXIS Vectoring Mig Video
 

Yea! The Mig is the nines.....but how about the lady that drives Seba to and from the field in her Lambo Murcilago.......only in Italy.....[sm=spinnyeyes.gif]

RE: Seba's 3-AXIS Vectoring Mig Video
 

That's really impressive! I can do that in my Extra, but it doesn't cost as much as my car :D

Very cool, it would be interesting to see how the vectoring thrust in controlled. Maybe a magazine will do an article on the jet?

Hats off !!!

RE: Seba's 3-AXIS Vectoring Mig Video
 

apparently he does already>

RE: Seba's 3-AXIS Vectoring Mig Video
 

If you look close at the pics in post 14 you can see the vector pipes are controlled by 2 servos each, as are all 2 axis vectoring set-ups, which will control pitch and yaw, but with 2 vector pipes they can work seperately to give roll axis control also, making it 3 axis vectoring,. so I assume he has them mixed with/to the appropriate sticks.. I just wonder if he uses a gyro to help stabalize the hover, probably not, as good as he is...

I guess maybe now more guys will be useing the term "circle flyers" in the r/c jet world as well as the props..
I have said it before and I'll say it again "If a jet doesn't have thrust vectoring it bores me to sleep."
Just kidding all you "circle flyers"..:D

RE: Seba's 3-AXIS Vectoring Mig Video
 

Just one word.

Awesome!!!!!!!!!!!

Well done,
John C

RE: Seba's 3-AXIS Vectoring Mig Video
 

Outstanding plane & flying skills..... thx for posting it! [sm=thumbup.gif]


Enrique

RE: Seba's 3-AXIS Vectoring Mig Video
 

What's next a scale F-35 stvol jet :D

RE: Seba's 3-AXIS Vectoring Mig Video
 

Whaaaaaaaaaaaaaaaaaaaaaaaaat!?

The bar has been set! Truly amazing to think of something that big and that EXPENSIVE standing up on its tail and floating around that close to the ground.

Wait...it can't be real, it must be photoshop, or "videoshop" or something. Johnny are you out there--can you verify this?:)