RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)

- - AVT (https://www.rcuniverse.com/forum/rc-jets-120/6569647-avt.html)

heritageflstc

11-01-2007 09:20 PM

AVT

I am setting up my ECU on my Ram 750P and it says to adjust the ATV is required to get the lights to stop flashing.
What is this and how is it adjusted? The manual says nothing.

Ruizmilton

11-01-2007 09:22 PM

RE: AVT

Which Model do you have? Airstart or autostart?

heritageflstc

11-01-2007 09:24 PM

RE: AVT

Air

Ruizmilton

11-01-2007 09:36 PM

RE: AVT

PM me your e-mail address, I'll send you the manual for an airstart ECU....

Bobman

11-01-2007 09:48 PM

RE: AVT

Just replied in your other thread also but just remembered..... check the servo reverse switch on the throttle channel. If you can't get the LED to stop flashing with any stick / throw adjustment try reversing the switch. The ECU looks for a certain pulse width at full rthrottle vs. low throttle. You'll need to power the ECU down & start over after you do this.
Bob

All times are GMT -8. The time now is 01:48 PM.