Flap Servos
 

Hi guys, I was wondering who makes the strongest "analog" metal gear servo and if you could please post the specs.


Thank you!

RE: Flap Servos
 

?

RE: Flap Servos
 

2721 on 6 volts? Scott

RE: Flap Servos
 

Hitech 985MG
0.16 / 0.13 sec @ 60 deg.
Torque: 133.31 / 172.20 oz.in (4.8v/6v)

Hitec 645MG
Speed: 0.24 / 0.20 sec @ 60 deg.
Torque: 106.93 / 133.31 oz.in (4.8v/6v)


JR 2721
Torque:116 oz/in @ 4.8V, 148 oz/in @ 6V
Speed:.18 sec/60° @ 4.8V, .15 sec/60° @ 6V

JR 4721
Torque:119 oz/in @ 4.8V, 140 oz/in @ 6V
Speed:.22 sec/60° @ 4.8V, .19 sec/60° @ 6V


Alan

RE: Flap Servos
 

hi, 4721 is not metal gear. I second the JR 2721, best analog servo out their.
Rcpete

RE: Flap Servos
 

The 985's don't have the holding power unfortunately...but fortunately the local Hitec dealer let me trade them in for 5985's and what a difference!!

RE: Flap Servos
 

Hi Johnny,

as far as I know the strongest non digital standard sized Futaba servo is the S5301.. it has metal gears, and 290 oz/in at 6V...


Saludos, (best regards) Enrique.

RE: Flap Servos
 

Thank you all for the help, very much appreciated.