Hi guys, I was wondering who makes the strongest "analog" metal gear servo and if you could please post the specs.


Thank you!

?

2721 on 6 volts? Scott

Hitech 985MG
0.16 / 0.13 sec @ 60 deg.
Torque: 133.31 / 172.20 oz.in (4.8v/6v)

Hitec 645MG
Speed: 0.24 / 0.20 sec @ 60 deg.
Torque: 106.93 / 133.31 oz.in (4.8v/6v)


JR 2721
Torque:116 oz/in @ 4.8V, 148 oz/in @ 6V
Speed:.18 sec/60° @ 4.8V, .15 sec/60° @ 6V

JR 4721
Torque:119 oz/in @ 4.8V, 140 oz/in @ 6V
Speed:.22 sec/60° @ 4.8V, .19 sec/60° @ 6V


Alan

hi, 4721 is not metal gear. I second the JR 2721, best analog servo out their.
Rcpete

The 985's don't have the holding power unfortunately...but fortunately the local Hitec dealer let me trade them in for 5985's and what a difference!!

Hi Johnny,

as far as I know the strongest non digital standard sized Futaba servo is the S5301.. it has metal gears, and 290 oz/in at 6V...


Saludos, (best regards) Enrique.

Thank you all for the help, very much appreciated.