RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Chippy Ho Part Deux (https://www.rcuniverse.com/forum/rc-jets-120/7525622-chippy-ho-part-deux.html)

SDCrashmaster 06-14-2008 03:55 PM

RE: Chippy Ho Part Deux
 
Looking Good Raf!

mikedenilin 06-15-2008 06:52 AM

RE: Chippy Ho Part Deux
 
Hi Raf,

Looks great. Get it up in the air soon. Well, only after you solve the leaking air cylinders. I have found some similar problems on other air cylinders too. I am sending some replacements over here to California. Will send you a couple of them.

Mike

Ehab 06-15-2008 09:35 AM

RE: Chippy Ho Part Deux
 

ORIGINAL: ravill

snip...snip.... although I pride myself in meticulous gear discpline and maintainance,....snip....snip...Raf
Tell the truth now[sm=redface.gif][sm=redface.gif]

(here it comes; more jets and more flying!!)

552transco 06-15-2008 02:09 PM

RE: Chippy Ho Part Deux
 
Hi Raf,

Nice pictures, thanks for sharing. Reading about your problems with the air cylinders, I am wondering if any brand of cylinders are dependable. I've read other threads with people having problems and there doesn't seem to be any brand that doesn't leak. One cylinder, in particular, people seem to like is the BVM one. At 27.50 each it's difficult not to go with Air Power or Tam's cylinders. I guess if BVM's cylinders are as dependable as I have read, it might be worth the extra money for them. I would like to stay close to home and pick use Tam's products when I can. Anyway, thanks for the pictures Raf. Any chance of a getting a few more pictures of the gear doors on the mains and the nose?
Raf, I noticed you didn’t use any carbon fiber reinforcement when you installed the gear. Does it really make that much difference with of without it?
Thanks Raf,

Wayne

ravill 06-16-2008 04:55 PM

RE: Chippy Ho Part Deux
 
I've been really happy with the cylinders I've bought from Tam.

My blue angels f-18c has seen its fair share of abuse and it does not have any carbon fiber ont he gear mounts. I didn't put any on this airplane either. Any jet of mine that can survive over 200 of my landings, has to be able to stand some abuse!! :D

Oh, and Ehab, I'll give you credit for teaching me to check the gear before EVERY flight EVERY time. And I still do it every time before every flight. Just like I peruse my preflight checklist. The only jet guy doing it!![sm=thumbup.gif]

Raf

552transco 06-17-2008 01:41 PM

RE: Chippy Ho Part Deux
 
Thanks Raf, you told me what I wanted to hear. I can stick with Tam's equipment. I also like your answer on the carbon fiber reinforcement of the landing gear. It looks impressive but if I don’t need it all the better. I’ll just do like Ehab suggested and check the gear before each flight.
Thanks again Raf,

Wayne

ravill 06-17-2008 03:00 PM

RE: Chippy Ho Part Deux
 


ORIGINAL: mikedenilin

Hi Raf,

Looks great. Get it up in the air soon. Well, only after you solve the leaking air cylinders. I have found some similar problems on other air cylinders too. I am sending some replacements over here to California. Will send you a couple of them.

Mike
Mike, remember when I bought it, I asked about if the cylinders would leak? :)

The answer is yes!!

I'll take some cylinders that don't leak please. [sm=thumbup.gif]

Raf

dubd 06-17-2008 06:58 PM

RE: Chippy Ho Part Deux
 
Raf, sweet arse Hornet! Seeing yours fly has motivated me to start on mine.

ravill 06-19-2008 09:56 AM

RE: Chippy Ho Part Deux
 
1 Attachment(s)
Dantley,

Lets fly your horneezzyy!!!

Here's some pics with the extra yellow and the ordinance. ;)

Raf

ianober 06-19-2008 11:37 AM

RE: Chippy Ho Part Deux
 
MAIDEN TIME!!!!

JetsRC 06-19-2008 11:42 AM

RE: Chippy Ho Part Deux
 
1 Attachment(s)
Hi Raf, finally got mine... I am back on the Hornet side again...:D:D:D


Gordon Mc 06-19-2008 12:00 PM

RE: Chippy Ho Part Deux
 


ORIGINAL: ravill
Here's some pics with the extra yellow and the ordinance. ;)
Just wondering ... is the "extra yellow on the wings" part done so that it's easier for me to locate all the pieces the next time your wings depart the airframe ?

Wouldn't it be better to keep the wings grey and just have them put together with better material and glue ? ;)

Ehab 06-19-2008 12:13 PM

RE: Chippy Ho Part Deux
 
Ouch!!!!!!!!

;)Careful Gordy; You do not fly as much as Raffy does, hence you are no good and you are a lower class modeller:):)...

Let's meet at the field sometime and teach Raffy how to land;);)

ianober 06-19-2008 12:21 PM

RE: Chippy Ho Part Deux
 
Oh boy, here we go!!!! Popcorn and beer in hand.

Ehab 06-19-2008 12:25 PM

RE: Chippy Ho Part Deux
 


ORIGINAL: ianober

Oh boy, here we go!!!! Popcorn and beer in hand.
Taquila and salt and lime for me please:D

ravill 06-19-2008 12:37 PM

RE: Chippy Ho Part Deux
 
Michel,

Glad to see you got a SUPA HORNEE again!!! :D:D[sm=thumbup.gif]

And Ehab, I'll respond because its so much fun to outfly you and outland you!!! Don't get mad 'cause you don't have any jets to fly and you hate this country so much you want to go to another country. Its ok man, I still love you.

When you actually get off your lazy butt and maiden that F-4 that Ian built for you (leave it alone and just fly it). Once your done going around the field 10 times 'cause you can't land it and BEG me to land it for you, I'll think about it!! :) But knowing you, you'll just crash it blaming the cross wind or being "shot down" on 2.4 "not so" FASST or who knows what you'll think of. :)

Remember that sig 40 with a PST 10 you flew in thailand is not quite a phantom homeboooyyyeee!!! :)

Raffipoo

ravill 06-19-2008 12:40 PM

RE: Chippy Ho Part Deux
 


ORIGINAL: Gordon Mc



ORIGINAL: ravill
Here's some pics with the extra yellow and the ordinance. ;)
Just wondering ... is the "extra yellow on the wings" part done so that it's easier for me to locate all the pieces the next time your wings depart the airframe ?

Wouldn't it be better to keep the wings grey and just have them put together with better material and glue ? ;)
Yes, Gordon. The yellow is for you to be able to find all the pieces. Last time you didn't bring back enough pieces for my liking. Could you please work on that aspect as a spotter, I mean jeeze...:)

Raf

Gordon Mc 06-19-2008 12:47 PM

RE: Chippy Ho Part Deux
 


ORIGINAL: ravill
Yes, Gordon. The yellow is for you to be able to find all the pieces. Last time you didn't bring back enough pieces for my liking. Could you please work on that aspect as a spotter, I mean jeeze...:)

Raf
Sorry bud ... I'm just not that good at trying to watch 27 pieces with only 2 eyeballs.

Maybe we could hook up and try doing it a few more times, so that we can see whether I can improve with practice ? Lemme know. ;)

Gordon

ravill 06-19-2008 12:58 PM

RE: Chippy Ho Part Deux
 
Gordon,

What well do is that I'll spot you on your hunter(camowings) and blow the wing up, like BVM did with that F-18F, and see if I can spot all the pieces, then well try it with your BARF with the yellow wings and compare our results. That sounds GREAT to me!!:)

Raf

Ehab 06-19-2008 01:07 PM

RE: Chippy Ho Part Deux
 
Raffy, you are so insecure man:D:D:D...

are you not dying to go with me to "another counrty" you double crossing B..tard:):).....

Let's see how long this Ho will be with you [&:][&:]

ianober 06-19-2008 01:13 PM

RE: Chippy Ho Part Deux
 
You guys are awesome!!!!!:D

ravill 06-19-2008 01:18 PM

RE: Chippy Ho Part Deux
 
Ehab, you really shouldn't wish people to crash their jets.

Is that why you don't build and fly all of those jets at your house? You've spread so much bad karma that Allah will bring a burning jihad on your jets??[sm=what_smile.gif]

Raf

Ehab 06-19-2008 01:23 PM

RE: Chippy Ho Part Deux
 
Watch your words Jabba....The Ol' Mighty can emit on 72 mhz ans 2.4 Ghz :)

ianober 06-19-2008 01:32 PM

RE: Chippy Ho Part Deux
 
Burning Jihad??? LOL

Classic!!:D

captainjacobs 06-20-2008 02:08 AM

RE: Chippy Ho Part Deux
 
Ravill, could you confirm that it's a Jet Legend F18 painted ARF in Chippy Ho colors ?
I didn't find it in there catalog.


All times are GMT -8. The time now is 01:28 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.