RCBEE Gear & Door Sequencer
 

Hi guys,

I'd like to introduce my sequencer to you. Hope you like it!

http://www.rcbee.com/images/gds.jpg

video: http://hk.youtube.com/watch?v=IzIgVnW0qiw

Website: http://www.rcbee.com


Bgds,

Koo

RE: RCBEE Gear & Door Sequencer
 

Looks like a nice tool ... I tried to download your manual to learn more, but it is in a .rar format. You need to convert it to something like a PDF format.

RE: RCBEE Gear & Door Sequencer
 

Hi,

I've added the manual in .jpg format.

RE: RCBEE Gear & Door Sequencer
 

RCBEE
Are there any issues with 2.4 MHZ ?
Semper Fi
joe

RE: RCBEE Gear & Door Sequencer
 

This is the same one that Jetlegend sells?? they have their name on it??
V..

RE: RCBEE Gear & Door Sequencer
 

Same price as well

RE: RCBEE Gear & Door Sequencer
 

Hi, there are no issues with frequency. Koo

RE: RCBEE Gear & Door Sequencer
 

what voltage range is it operating in.signal input, output

RE: RCBEE Gear & Door Sequencer
 

Signal input is the output of receiver. Output is 5v, or supplied voltage when supplied voltage is lower than 5v.

Koo

RE: RCBEE Gear & Door Sequencer
 

Yes, it is the same.

Koo

RE: RCBEE Gear & Door Sequencer
 

What I believe uncljoe was referring to is this unit designed to operate at the lower logic level voltages that the new 2,4Ghz radios operate at, (i.e. 2.7V logic High)

RE: RCBEE Gear & Door Sequencer
 

Does anyone have one of these units yet? I have been trying to get one, but they wont take my Visa card.

RE: RCBEE Gear & Door Sequencer
 

Terry
Wagner of RC Jet Models is supposed to be carrying these in the US, you can check with him.

RE: RCBEE Gear & Door Sequencer
 

Hi Terry,

Please try to enquire dreamworksrc if you haven't gotten one.

Have a nice day!

Koo

RE: RCBEE Gear & Door Sequencer
 

Will this operate on the lower logic voltages of the new 2.4 GhZ radios

RE: RCBEE Gear & Door Sequencer
 

Now in stock... http://www.dreamworksrc.com/catalog/...oducts_id=1596

Tested on JR 2.4, no operating issues detected.
Todd

RE: RCBEE Gear & Door Sequencer
 

Set up the time of each step.

http://www.rcbee.com/video1.asf

RE: RCBEE Gear & Door Sequencer
 

If your plane doesn't need gear door closed when it is landing, e.g. F-16, so just need connect two
servosDOOR 1 and GEAR, also need to set the time from opening DOOR2 to lowering gear as "0" for
dropping gear.

http://www.rcbee.com/video2.asf

RE: RCBEE Gear & Door Sequencer
 

Set up the rotation position of the servo, and setup of reversing( actually, to exchange two positions)

http://www.rcbee.com/video3.asf

RE: RCBEE Gear & Door Sequencer
 

I just purchased the RCbee sequencer from Todd at Dreamworks and installed it in my Fei Bao Rafale

I did some experimenting with the automatic fail safe operation... this feature alone was really worth the money!!!!

No more broken Gear doors due to turning on the transmitter with the switch in the wrong position.

One comment though, the manufacturer needs to have someone proof read the English instructions.

It still will not prevent mishaps when people bump your retract switch when your jet in sitting on the ground.

Here are the test results:

Gear initially in Down position (Gear Down Storage position or Flight ready mode)

1) Transmitter Off - Turn on receiver, the audible beeper starts beeping and the gear down LED flashes, gear will stay Down.
2) Transmitter On, Gear switch in Up position - Turn on Receiver the audible beeper starts a beeping and the gear down LED flashes, gear will stay Down.
3) Transmitter On, Gear switch in Down position - Turn on Receiver audible beeper beeps once indicating normal operation and the gear down LED goes to a solid on indication, gear stay Down.


Gear initially in Up position (Gear up Storage position)

1) Transmitter Off - Turn on receiver, the audible beeper starts beeping and the gear down LED does not illuminate, gear will stay Up.
2) Transmitter On, Gear switch in Down position - Turn on Receiver the audible beeper starts beeping and the gear down LED flashes, gear will stay Up.
3) Transmitter On, Gear switch in Up position - Turn on Receiver audible beeper beeps once indicating normal operation and the gear down LED does not illuminate, gear will stay Up.

RE: RCBEE Gear & Door Sequencer
 

Here are a couple of my install photos:

RE: RCBEE Gear & Door Sequencer
 

I'm running a 6S lipo 22 volt system in my plane. Will this take that voltage?

RE: RCBEE Gear & Door Sequencer
 

Says 3.5 to 6.5 V here

http://www.rcbee.com/index.php?Page=11

Go on, chance it ! :D

RE: RCBEE Gear & Door Sequencer
 

My DX18 has a built in sequencer. I have it installed in my F-100 and it works fantastic.

No more extra electronic gadgets for me.

RE: RCBEE Gear & Door Sequencer
 

Thanks for the link. I will not try it,just use the AssAn I have.Thank you.
http://www.hobbyking.com/hobbyking/s...dProduct=11258