RCU Forums - Roo, cg and control throws

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)

- - Roo, cg and control throws (https://www.rcuniverse.com/forum/rc-jets-120/806159-roo-cg-control-throws.html)

jeteffx

05-26-2003 10:45 PM

Roo, cg and control throws

I have a ROO that I need cg location and control throws......... if anyone has these numbers , may I have them please....thanks....Perry

Bill_Jehle

05-27-2003 01:09 AM

Roo, cg and control throws

Perry,

CG at front flange screws of main gear. Throws at 25 mm on elevator and aileron. However, dual rate the ailerons for 15 mm as the roll rate is quite high at 25 mm. Do a search for Roo CG and throws and you will find more info. Have fun.

jetflyr

05-27-2003 03:01 AM

Roo, cg and control throws

The instructions say 4" in front of the spar. Mine is 4 3/4, test flight was 5 1/4 in front of the spar.
my ailerons are .6" and the elevator is 1.25" each way.
Greg

All times are GMT -8. The time now is 10:17 AM.