![]() |
HANDHELD COMPRESSOR BATTERY????
1 Attachment(s)
Where would I be able to purchase one of these. I have looked all over the internet and can't find one.[:@] Dimensions are 2.5 tall X 4 long & 1 3/4 inches wide with the terminals on the side.. |
RE: HANDHELD COMPRESSOR BATTERY????
Do you have a Batteries Plus store near you???...They can get just about any battery made!!!
http://www.batteriesplus.com/ Kevin |
RE: HANDHELD COMPRESSOR BATTERY????
ORIGINAL: Kevin Greene Do you have a Batteries Plus store near you???...They can get just about any battery made!!! http://www.batteriesplus.com/ Kevin Thanks Kevin. I'll check. |
RE: HANDHELD COMPRESSOR BATTERY????
No dice.... The guy said "I have never seen one of those"....... |
RE: HANDHELD COMPRESSOR BATTERY????
I have a unique guy working at the Batteries Plus store near me...He is president of one of our local clubs and obviously an avid modeler...This guy makes up all of my packs for me-From TX packs to turbine and RX packs....Stress tests them too before delivery!!!...I'll show him a pick of the battery and put him on the hunt...
Kevin |
RE: HANDHELD COMPRESSOR BATTERY????
ORIGINAL: Kevin Greene I have a unique guy working at the Batteries Plus store near me...He is president of one of our local clubs and obviously an avid modeler...This guy makes up all of my packs for me-From TX packs to turbine and RX packs....Stress tests them too before delivery!!!...I'll show him a pick of the battery and put him on the hunt... Kevin Thanks K..... |
RE: HANDHELD COMPRESSOR BATTERY????
This one will fit, but only 1.5 Ah, (Still probably better than the POS chinese one that came with it)
http://www.batteryprice.com/powerson...idbattery.aspx |
RE: HANDHELD COMPRESSOR BATTERY????
Maybe Fry's electronics ??
|
RE: HANDHELD COMPRESSOR BATTERY????
Try this one, no deminsions given though
http://www.powerstarsla.com/12v_3.2a...r_battery.html |
RE: HANDHELD COMPRESSOR BATTERY????
|
RE: HANDHELD COMPRESSOR BATTERY????
With all of the folks on this thread someone should be able to find it.... It is a Quest now.. The battery is for the VECTOR HAND HELD COMPRESSOR Item # VEC259.. |
RE: HANDHELD COMPRESSOR BATTERY????
Take it to your local motorcycle shop. I bet they have one. or maybe this?
http://www.horizonhobby.com/Products...x?ProdID=HAN19 |
RE: HANDHELD COMPRESSOR BATTERY????
Vector, Black and Decker, Airpro...all same thing with model VEC251B
there are a couple sites online that show it is discontinued or on backorder but this one allowed it to be placed in a shopping cart so it may work for you. It appears the compressor itself is discontinued. Part number appears to be 5140044-09 [link=http://www.dewaltservicenet.com/Products/ProductDetails.aspx?pid=69632&tid=15527&AspxAutoDe tectCookieSupport=1]battery link[/link] if that doesn't work this one shows backorder till 1/3/09 [link=http://www.ereplacementparts.com/black-and-decker-vec251-type-rechargeable-compressor-parts-c-4167_10512_10584.html]backorder link[/link] try some more with that part number or vec195 may also be helpful. I would also find out if you have one of those outlet type malls in your area there is usually a Black & Decker outlet among them. They may have it or can get it for you. If not maybe a DeWalt parts/service center locally. Good luck |
RE: HANDHELD COMPRESSOR BATTERY????
I went to the following site that lists batteries for Vector tools and they don't list a battery for the vec259. I did see one for a vec137 etc. that is 12V 3AH that looks like yours. They do have technical contacts that you may want to try.
http://www.vectormfg.com/site2/frontpages/company.htm |
RE: HANDHELD COMPRESSOR BATTERY????
Why not just solder up a nicad one? Should be able to make it fit in the same space. Or put an external feed on it and use an outside source. Bob
|
RE: HANDHELD COMPRESSOR BATTERY????
ORIGINAL: B58 Why not just solder up a nicad one? Should be able to make it fit in the same space. Or put an external feed on it and use an outside source. Bob Tried that already... The pack does not pack the PUNCH of the Lead Acid.... |
RE: HANDHELD COMPRESSOR BATTERY????
ORIGINAL: AFTERBURNER1 Where would I be able to purchase one of these. I have looked all over the internet and can't find one.[:@] Dimensions are 2.5 tall X 4 long & 1 3/4 inches wide with the terminals on the side.. http://www.apexbattery.com/sel-batte...batteries.html |
RE: HANDHELD COMPRESSOR BATTERY????
My Vector grenaded itself, but the battery is still good. PM me your address and i will ship it to you on Monday.
|
RE: HANDHELD COMPRESSOR BATTERY????
Drop kick ol' trusty into the trash bid, swing on down (with your dog;)) to Home Depot and pick up a brand new Campbell Hausfield for $35 . Done!
Billy |
| All times are GMT -8. The time now is 10:44 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.