Avia S-92
 

Hi every one.

I wanted to share some pictures of my current project: the Grumania Me-262.
The plane was presented here about one year ago:
http://www.rcuniverse.com/forum/m_8271609/tm.htm

I have chosen the scheme for this one: the early prototype "PL-01" as presented out of the factory in 1946.
The plane was in an "out of production line" bare metal condition in the following pictures and got painted in gull grey a few months later.
I' d like to thank the Museum of Techniques of Praha for providing the scale material.

http://www.geohei.lu/olin/photos/Hob...eft%20back.jpg

http://www.geohei.lu/olin/photos/Hob...er%20right.jpg

And the model:

http://www.geohei.lu/olin/photos/Hob...24_web_raw.jpg


http://www.geohei.lu/olin/photos/Hob...27_web_raw.jpg


http://www.geohei.lu/olin/photos/Hob...30_web_raw.jpg


http://www.geohei.lu/olin/photos/Hob...33_web_raw.jpg

Contrary to the previous project, this one will be finished in a fairly good aluminium condition. I will just add a very subtle tone of weathering/corrosion to match the very good condition of the subject at the time of delivery.

RE: Avia S-92
 

I will follow up the Flite Metal covering on Ed's website.
When the project will be finished, I will of course submit the third part of the RCJI article.

RE: Avia S-92
 

olnico, Grumania makes some fine products, and the 262 has always been one favorite models. We make a small composite 262 for 65 mm to 76 mm fans and I have 3 Large 90 mm 262s. Good luck on your Grumania 262.

Morris
www.Ductedfans-RC.com