RE: My scale 1/5 F-16 B
Thanx Andy :D:D.
Greetings, Peter |
RE: My scale 1/5 F-16 B
Looking great!!!
|
RE: My scale 1/5 F-16 B
Picked up the bulkhead today, very nice thing :D:D. I will try to find out what it's place is in the F16. I think somwhere between the fuelpanels.
Anyone have a guess? http://www.modelbouwforum.nl/forums/...e84055-008.jpg http://www.modelbouwforum.nl/forums/...e84053-005.jpg http://www.modelbouwforum.nl/forums/...e84054-006.jpg |
RE: My scale 1/5 F-16 B
Peter, like all those who have posted I am astounded by the detail and incredible work - real craftsmanship.
Not sure if you have mentioned the turbine in the thread you are fitting but please if you require a good air trap, I will happily donate you a CAT from my range to suit, Olivier Nicolas has tested the large version on the BF Turbines B300F with perfect results so shout if you wish to take me up on the offer. Looking forward to the results and use a good wax ;) marcs |
RE: My scale 1/5 F-16 B
Thanx :)
Hi Marc, I did not mentioned any turbine but I will make it big enough that the B300F will fit. I have a dxf file from BF but perhaps you have a other one, sure I will be happy to receive the one you have. Every data is welcom. :) This is my molding wax.......... Greetings, Peter http://www.modelbouwforum.nl/forums/...e84058-010.jpg |
RE: My scale 1/5 F-16 B
1 Attachment(s)
Peter, I have a PDF attached below on the dimensions for the B300F - it would make a perfect turbine for this project (subject naturally to the final AUW ;))
Although wax is OK the application of PVA after a layer of wax really does give you the safety element - only issue is it can be difficult to apply over wax without beading, not always a totally gloss finish but 100% barrier to sticking resins and such like. Let me know when you get closer to the final installation phase/planning and I will pop one over to you. marcs |
RE: My scale 1/5 F-16 B
That one is really is a big AUW [:o]
|
RE: My scale 1/5 F-16 B
Hey Peter, nice frame you've gotten. it can be hung on the wall perfectly. BTW, this part of the intake must be the most difficult sheeting, i'll be alert with your progress man. Good work!
Grts, Peter. |
RE: My scale 1/5 F-16 B
Hi Pablo, yes this part was a bit more tricky. Made a few pieces to get a good fit, you don't need to heat it.
Your'e sheeting looks also very good. Have now separated the intakelip from the body so it can become a separate mold. http://www.modelbouwforum.nl/forums/...e84326-001.jpg The sheet and intake parts. http://www.modelbouwforum.nl/forums/...e84327-002.jpg In place, also a extra panel above the main gear door. http://www.modelbouwforum.nl/forums/...e84328-003.jpg http://www.modelbouwforum.nl/forums/...e84208-001.jpg |
RE: My scale 1/5 F-16 B
The intakelip is now finished and ready for sheeting, not much but still important.
http://www.modelbouwforum.nl/forums/...e84442-001.jpg The real thing. http://www.modelbouwforum.nl/forums/...4-imgp1666.jpg |
RE: My scale 1/5 F-16 B
1 Attachment(s)
Hi Peter,
I attached you what i think is your frame Grts, Pablo |
RE: My scale 1/5 F-16 B
Hi Pablo, I think youre right.
Where can I find this on the web?? Greets |
RE: My scale 1/5 F-16 B
I got it from Jay Miller book: General Dynamics F16 Fighting Falcon - AeroGraph I
Grts, Pablo |
RE: My scale 1/5 F-16 B
Thanks, problem solved. :)
Panel above the intake. http://www.modelbouwforum.nl/forums/...e84522-003.jpg |
RE: My scale 1/5 F-16 B
As a long time scratch builder I fully understand the skill and dedication that is invested in this project, congratulations indeed.
m |
RE: My scale 1/5 F-16 B
Thanks Mick.
A little bit futher with the intake. After several layers of epoxi primer and sanding and filling it looks nice now. When all of the alu is on it I will put clear coat on the white parts and then is this part ready. http://www.modelbouwforum.nl/forums/...e84777-002.jpg http://www.modelbouwforum.nl/forums/...e84778-004.jpg http://www.modelbouwforum.nl/forums/...e84786-006.jpg http://www.modelbouwforum.nl/forums/...e84787-010.jpg |
RE: My scale 1/5 F-16 B
Peter, I am blow away and speech less. You are a world class builder. I have not seen anything like this except for Herald Huff Su27.Your project is in a class of it own. Thanks for sharing and giving us some incite what it takes to build a world class model....I'm just blow away. I wish the rest of the Jet Master builders would share what they know. Even if I knew how I don't think I have the hands or eyes to do that kind of work. Very very inspiring.
|
RE: My scale 1/5 F-16 B
:D:D Thank you very much, I do my best to make it realistic. This inspires me again :).
This is the last progress from today. The small part above the intake is made out of two pieces, on top of it sits Pacer bond. I simulated it with special arcraft aluminium wich has a sticky side. http://www.modelbouwforum.nl/forums/...e84926-005.jpg http://www.modelbouwforum.nl/forums/...e84925-007.jpg Picture of the real one, the black painted area is Pacer bond and it has little dots in it. I will make this also in the alu. http://www.modelbouwforum.nl/forums/...8-demo-096.jpg |
RE: My scale 1/5 F-16 B
I have a little update............ small pieces taking a lot of time :).
http://www.modelbouwforum.nl/forums/...e85759-001.jpg http://www.modelbouwforum.nl/forums/...e85760-002.jpg Some strange panels, I don't fill the gaps they show in the model where to make openings. Under it sits the hook mechanism. http://www.modelbouwforum.nl/forums/...e85761-003.jpg http://www.modelbouwforum.nl/forums/...e85762-005.jpg http://www.modelbouwforum.nl/forums/...e85782-006.jpg Did some drawing while the model was on a show. http://www.modelbouwforum.nl/forums/...e85758-003.jpg |
RE: My scale 1/5 F-16 B
Super gear, Peter!!!. Love details. Will you machine it by CNC?
Grts, Pablo |
RE: My scale 1/5 F-16 B
ORIGINAL: pquispea_m5 Super gear, Peter!!!. Love details. Will you machine it by CNC? Grts, Pablo That is the intention Pablo, you are going fast by the way. Have made the bathtub as the mechanics call it. A lot of rivets :D. http://www.modelbouwforum.nl/forums/...e86400-003.jpg http://www.modelbouwforum.nl/forums/...e86401-004.jpg http://www.modelbouwforum.nl/forums/...e86402-009.jpg http://www.modelbouwforum.nl/forums/...e86403-011.jpg http://www.modelbouwforum.nl/forums/...e86404-013.jpg |
RE: My scale 1/5 F-16 B
Looking great peter. Do you plan to "3D" the bath-tub, or just mold is as seen, and then cut it out later?
|
RE: My scale 1/5 F-16 B
Hi Thomas, there is no option for 3D because there are rivets in the tub. I have a picture which shows this, it won't release so it has to be cut out later.
By the way you are going great with the F14, what a beast :D. Greetings, Peter http://www.modelbouwforum.nl/forums/...5-foto0379.jpg |
RE: My scale 1/5 F-16 B
Holy smokes, your gonna do the rivets in there to? Very impressive. Thanks for the compliments, its getting there. Slowly
|
RE: My scale 1/5 F-16 B
Slowly ??;) I am trying to catch up but there is to much detail :D.
The tub is now ready. http://www.modelbouwforum.nl/forums/...e86424-001.jpg http://www.modelbouwforum.nl/forums/...e86425-002.jpg |
All times are GMT -8. The time now is 11:09 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.