Whoooooppppeeeee!!!!
#1
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Hey everyone, just wanted to let you know I have purchased my first Nitro MT and it will be here in about a week. I went with the T Maxx 2.5, and I would go into the reasons, but all you out there that has one already knows. I am so excited to get to play, rather than just reading about you all having so much fun with yours. Crash you better watch out I am gunna want to be out there bashin around in no time. Anyhow, just thought I would let you all in on the excitement. Updates are sure to follow. Peace!!!
#2
Senior Member
Join Date: Dec 2002
Location: San Francisco
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
hold right there, son. dont get too exited. be patient during
the breaking in.
some poeple cant wait until the the breaking in finishes.
that is very BAD for the engine.
make sure you follow the manual , and do the breaking in.
after the break in. you still need to be careful. the full break
in is more than 10 tanks.
the breaking in.
some poeple cant wait until the the breaking in finishes.
that is very BAD for the engine.
make sure you follow the manual , and do the breaking in.
after the break in. you still need to be careful. the full break
in is more than 10 tanks.
#3
Senior Member
My Feedback: (16)
Join Date: Feb 2002
Location: Albion, WA
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Dlock......Man....your making me want to go start mine up and goof off with it!
That's great news!!! I'm glad you finally got to buy one. Your going to love it!!!
We're going to have to get together. Let me know when you have time.....AND....we need some nice weather!!!! Ohhhh....I'm sure that won't stop you. I'll bet it could be 50 below and you would be out cranking on your new TMaxx ready to go at a moments notice.
Don't forget to breath.....
That's great news!!! I'm glad you finally got to buy one. Your going to love it!!!
We're going to have to get together. Let me know when you have time.....AND....we need some nice weather!!!! Ohhhh....I'm sure that won't stop you. I'll bet it could be 50 below and you would be out cranking on your new TMaxx ready to go at a moments notice.
Don't forget to breath.....
#6
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Hey Land, no feelings hurt here =). I know this is all in good fun. From reading the other posts on break-ins and such. I know it is not a task to be taken lightly. I plan on doing everything by the book, dotting all the T's and crossing all the I's Ha Ha Ha just kidding, but seriously I plan on being very careful and doing everything rihgt. Even if I have to break the sucker in, inside my house I will(Yeah right my girlfriend will love that one) Anyhow Crash, we will have to get together soon. Keep your fingers crossed on the weather. Until then, see you all later.
#8
Senior Member
Join Date: Dec 2002
Location: San Francisco
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
it is not a good idea to run nitro indoor. specially during the
breaking in, the engine is running extremely rich, lots of smoke
will come from the pipe. those smoke smells like chemical weapon.
breaking in, the engine is running extremely rich, lots of smoke
will come from the pipe. those smoke smells like chemical weapon.
#9
Senior Member
Join Date: Dec 2002
Location: Cyclone,
PA
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Did you just say dot all your T's and cross all your I's. J/K
Glad to here that you could get one. I just broke mine after idleing to tanks and driving for half of one. It stalled at the end of my drive way so i just took it in the house. I was then trying to make it so i could get some more throttle, because if i would barly give it gas it would stall.
Well almost had it so it could get half and it stalled on me, went to go start it and pull, snap, ping went to rip cord.
Took it in the house pulled off the engine took of the case to the rip cord and the spring is snapped and the cord is no good. Do you know where i could get anymore? I have the Ofna Ultra Lx Pro Buggy. :boxing:
Glad to here that you could get one. I just broke mine after idleing to tanks and driving for half of one. It stalled at the end of my drive way so i just took it in the house. I was then trying to make it so i could get some more throttle, because if i would barly give it gas it would stall.
Well almost had it so it could get half and it stalled on me, went to go start it and pull, snap, ping went to rip cord.
Took it in the house pulled off the engine took of the case to the rip cord and the spring is snapped and the cord is no good. Do you know where i could get anymore? I have the Ofna Ultra Lx Pro Buggy. :boxing:
#10
Member
Join Date: Jan 2003
Location: Florida
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Break In Process....
I am new to the whole NITRO scene and recently bought a TMAXX.
I followed the break process from the DVD.
Well, close to the video... it takes a lot of will power
The problem is, I had no clue what I was doing and really worried that I messed up the engine from running it too hot? I now have a temp gun and from reading some other post in here.... I am planning on switching fuel.
But, how do I know if I messed up the engine and how much is it to rebuild it? or will I need to get a new one?
I followed the break process from the DVD.
Well, close to the video... it takes a lot of will power
The problem is, I had no clue what I was doing and really worried that I messed up the engine from running it too hot? I now have a temp gun and from reading some other post in here.... I am planning on switching fuel.
But, how do I know if I messed up the engine and how much is it to rebuild it? or will I need to get a new one?
#12
Senior Member
My Feedback: (16)
Join Date: Feb 2002
Location: Albion, WA
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Re: Break In Process....
Originally posted by Bandwidth
But, how do I know if I messed up the engine and how much is it to rebuild it? or will I need to get a new one?
But, how do I know if I messed up the engine and how much is it to rebuild it? or will I need to get a new one?
As LandShark said....keeping the carb adjusted so it's running on the rich side will help your engine reach it's intended life span.....barring any unforeseen things like premature wear....or engine failure due to bad parts....etc. Running an engine lean will certainly damage it and what is most noticeable is a loss of power "anytime you run it" at any needle settings.
Also....if an engine is run lean...and it gets hot...and I mean hot....it will smoke which will be a visible sign to you that you may have just ended it's usefulness.
Re-cap.....run it rich.
Good Luck!
#13
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Just to let everyone know, my packages have shipped and will hoepfully(crosses his fingers) be here on Friday. I can't wait!!!
#14
Senior Member
My Feedback: (16)
Join Date: Feb 2002
Location: Albion, WA
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Originally posted by Dlock
Just to let everyone know, my packages have shipped and will hoepfully(crosses his fingers) be here on Friday. I can't wait!!!
Just to let everyone know, my packages have shipped and will hoepfully(crosses his fingers) be here on Friday. I can't wait!!!
Dlock......breath buddy....breath!
#15
Senior Member
My Feedback: (10)
Join Date: May 2002
Location: greeleyCOLORADO
Posts: 760
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
something iv noticed about the nitro motors is if you are running them to lean they try to let you know it with flame outs,like it wont idle right or stalls dureing acceleration,if you listen they will tell you whats wrong
#16
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
WEEEEEEHAAAAWW!!!!! Got my truck from the wonderful people at FedEx today. Tower Hobbies did a wonderful job getting it to me ASAP. Now hopefully I get my fuel tomorrow so I can start the break in process. I hope the weather is as good as it was today, it was truly glorious, as Crash well knows. I will be posting some pictures as soon as I figure out how. Laters.....
#18
Senior Member
Join Date: Dec 2002
Location: Cyclone,
PA
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Dlock, I dont know if this will happen to you or not.
After i got my buggy it took the fuel about 5 more days to get to my house, i got the Red Alert 20% fuel.
After i got my buggy it took the fuel about 5 more days to get to my house, i got the Red Alert 20% fuel.
#19
Senior Member
My Feedback: (16)
Join Date: Feb 2002
Location: Albion, WA
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Dlock and I are neighbors....somewhat. We live about 15 miles apart. He will be able to buy his fuel locally at Hobby Town so he shouldn't have the same problem you had....with no fuel showing up.
Dlock....Pray for good weather buddy!
Dlock....Pray for good weather buddy!
#20
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
I did not have a problem getting the fuel shipped to me. Even though one came from Illinois, and the other came from Nevada. They got here one right after the other. Now all I need is good weather to break this thing in.....
#21
Senior Member
My Feedback: (16)
Join Date: Feb 2002
Location: Albion, WA
Posts: 1,706
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Ahhhh....I didn't know that you bought your fuel by shipment? I have been buying the Wildcat brand at Hobby Town. It's a highly rated fuel....and seems to be working well in my TMaxx and other rigs.
#22
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
I just ordered some of the Traxxas Top Fuel. I figured I might as well get it all in one package. I also ordered a Trinity starter package http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXATF8 That should be here soon, but I got enough to get me going for now .
#24
Whoooooppppeeeee!!!!
I'm feelin da Brotha hood of them RC folks raight here maan..
I feel da loooove.. Ai feel it!
Ok ok.. I was bored.. I'll stop!
Man I'm havin a hard time deciding whethere I want a buggy or a monster truck..
Buggy: fast and can go on rough terraing.. fast!
MT: Well you know what this can do CHEAPER TOO!
costs about half as much as a tripped up buggy!
Help me decide!! -ram
I feel da loooove.. Ai feel it!
Ok ok.. I was bored.. I'll stop!
Man I'm havin a hard time deciding whethere I want a buggy or a monster truck..
Buggy: fast and can go on rough terraing.. fast!
MT: Well you know what this can do CHEAPER TOO!
costs about half as much as a tripped up buggy!
Help me decide!! -ram
#25
Senior Member
Join Date: Dec 2002
Location: Cyclone,
PA
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Whoooooppppeeeee!!!!
Well im glad to here you didnt have the same trouble that i had. It was very annoying not having the fuel come on time.
Good news for me though, my new rip cord assembaly came today .
Now i just have to wait for getter weather (warmer) to come it.
Its to hard to be out there in -8 weather
Good news for me though, my new rip cord assembaly came today .
Now i just have to wait for getter weather (warmer) to come it.
Its to hard to be out there in -8 weather