p8ntball

how do you do a backflip? does there need to be a special type of ramp?

a_dizzle1982

not really. I've done them off all kinds of ramps. the best are quater pipes, like a skate board ramp. You just need to get a lot of air and hold the gas down the whole time until you get a full rotation. hope that help good luck

HerrSavage

The bigger the tires, the easier the backflips..... Just hold the gas down when you jump..

ttoks

don't go over bored with them though, you can easily over rev an engine doing back flips, and if you land with the throttle on you can say goodbye to your spur gears, and possible diffs and tranny gears.

HerrSavage

Yes, I should have been more specific - hold the gas til it flips, but make sure you don't land on-throttle - ever...

Muggy250r

yeah let off the gas right b4 u land.........so for a backflip just hold it wide open and for a front flip (more air required) hit the brakes hard and then let off once it goes all the way around.....then work the gas/brake to land level

Muggy250r

maybe this will help........not the test guality or tuning (by me) but u get the idea........ http://video.google.com/videoplay?do...4&q=losi+muggy

Takedown

My Feedback: (23)

lol nice driving

Muggy250r

lol do u mean that in a good way or bad?

p8ntball

i see how you would do that... thank you