Help
12-22-2007 | 06:16 PM
#1
Thread Starter
Junior Member
Joined: Dec 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
From: , AL
Help
I recently purchased the smartech magic wheels off road monster truck...however when the truck arrived there was no owner's manual to explain how to start the truck. This is my first nitro truck and I don't want to mess it up but I'm not 100% sure how to start it....It is a 1/8 scale and I have the starter kit but am unsure what to do next.
12-22-2007 | 07:11 PM
#3
Senior Member
Joined: Sep 2006
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
From: Ft. Pierce,
FL
RE: Help
I found this link for you:http://www.smartechracing.com/Englis...how.asp?id=111
However, it's translated from Japanese, so it's pretty vague.I suggest you go to Traxxas.com and follow the break in procedure for the T-Maxx. The Smartech Magic Wheel is a knockoff of the T-Maxx, so close that a lot of TMX parts will interchange with the Smartech.From what I've heard, these are pretty good entry level nitro trucks. I jst looked at the ST site again and noticed it's a pullstart motor. You will need the following items to run this truck - glow ignitor, fuel ( 20% nitro content), batteries for the transmitter, batteries for the receiver on the truck and some after run oil.
However, it's translated from Japanese, so it's pretty vague.I suggest you go to Traxxas.com and follow the break in procedure for the T-Maxx. The Smartech Magic Wheel is a knockoff of the T-Maxx, so close that a lot of TMX parts will interchange with the Smartech.From what I've heard, these are pretty good entry level nitro trucks. I jst looked at the ST site again and noticed it's a pullstart motor. You will need the following items to run this truck - glow ignitor, fuel ( 20% nitro content), batteries for the transmitter, batteries for the receiver on the truck and some after run oil.
