First time assembler ??'s
01-08-2008, 08:51 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2007
Location: north platte,
NE
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
First time assembler ??'s
Bear with me on this one, this is my first build of sorts.
I baught a Warhead "roller" (cheap -really cheap)all that it is missing is the engine, so my question is.
If I start with a LRP Z.28 spec 3 what all do I need, parts wise - i would like to get them all at once and not get to work and then wait till I get parts again.
I have taken my stuff apart and put back together as needed but not started from scratch as this.
engine, clutch, springs, clutch bell, collet? I know most of these but what is the little stuff I am missing?
Thanks for the help
I baught a Warhead "roller" (cheap -really cheap)all that it is missing is the engine, so my question is.
If I start with a LRP Z.28 spec 3 what all do I need, parts wise - i would like to get them all at once and not get to work and then wait till I get parts again.
I have taken my stuff apart and put back together as needed but not started from scratch as this.
engine, clutch, springs, clutch bell, collet? I know most of these but what is the little stuff I am missing?
Thanks for the help
