how big a jump can my monster truck handle
hey all,
being new to rc i'm sorry for the dumb question but thought i would ask rather than breaking heaps of stuff and making life expensive i was looking at a ramps thread yesterday and watched a vid of one of you guys launching a buggy off a ramp(2dmaxlsd from memory?), now i'm wanting to jump my giga crusher, but i don't know if it's ok to do big jumps on them? , or should i have a buggy for that and keep the monster truck for just rough terrain, just really dont wanna get big air off a ramp and then smash all my suspension etc, any advice as to what the limits are of these things would be great. |
RE: how big a jump can my monster truck handle
if you can land it (the hard part) then I would try to stay under 10 ft (just to save parts)
My T-Maxx had a tough time at around 7.5 feet, b/c I wasn't landing good anymore....also I attempted a couple backflips (landed some)but the wrecks resulted in some carnage I believe the Giga crusher has 2 engines?...... if so your truck is going to be heavier so around 8 or so..... but stiffer springs, ride height, shock oil, etc can let you jump you car different heights |
RE: how big a jump can my monster truck handle
That was a truggy (LOSI Muggy) in the video. A monster truck is better for bashing, IMO.
|
RE: how big a jump can my monster truck handle
Most MTs will take a fair amount of abuse....But if you Start small and work you way up......You'll be able to land on your Wheels more often and in turn Break Less parts...
But you'll still end up breaking Parts sooner or later as it's a part of the game..... |
RE: how big a jump can my monster truck handle
yeah all the shocks etc are standard at the mo, seem pretty soft . i spose it doesn't weigh too much though, they do bring out the twin engine giga crusher (MF Mega Force) but mine is the single .28 motor (SF Single Force). you mean 7 feet in the air, heck that seems pretty high. awesome tho :D might have to make a crappy flat ramp with sum bricks and a sum bricks haha, thanks for the help so far guys much appreciated,
Cheers: Mark |
RE: how big a jump can my monster truck handle
ive been out doing some jumps before, a old shelf and a house concrete block (i will build something more advanced soon haha), got it about 2 feet up, i just locked my rear diff to see if it would be any good to do burnouts in, made it rwd , and holy crap, think washing machine ...bloodey awesome :D
i will do a video tommorrow of some jumps and some donuts, and hopefully some drifting mwuhahahaha lol |
RE: how big a jump can my monster truck handle
yeah life got interesting the other day coming down the strret at about 40 mph and jumped on the brakes , it did a rolling stoppie on the front wheels then went end over end about 5 times down the street, was quite funny to watch actually haha luckily nothing broke.
i'm such a n00b :P |
RE: how big a jump can my monster truck handle
well so much for the videos, somehow ive blown the trainmission seems to come in and out of gear when it feels like it, and my throttle servo has suddenly got gutless (i assume it isn't getting enough current (put new batterys in the car still the same and all the other servos work fine
|
RE: how big a jump can my monster truck handle
my LST jumps about this high with no complaints...
http://video.google.com/videoplay?do...43834814873350 |
RE: how big a jump can my monster truck handle
I have some friend here in california berkely, and this placehave this storage dirt site, some of those trukies dump their soil, or dirt, and as high as 15 feet high and we used those as our ramp, so our buggies and trucks on the air about 20-25 feet high, sometimes we have parts broken but if it land on the wheels, the trucks and buggies are in good shape.
I run lst1; lst2; savage-25, hyper 7. My friend have the lst, mayhem buggie, revo. sometimes 5 people show up, sometimes more than ten, it's a big constrantion site, wide open. we have lot of fun lanching our trucks and buggies in this site. |
RE: how big a jump can my monster truck handle
http://www.youtube.com/watch?v=4gz5QLMvKn I Ithink this is the link.
|
RE: how big a jump can my monster truck handle
no thats not it
|
RE: how big a jump can my monster truck handle
http://www.youtube.com/watch?v=4gz5QLMvKnI this is it.
|
RE: how big a jump can my monster truck handle
A lot of it depends on the truck and the driver. (And luck)
I have seen people jump over 15 feet high, 4 or 5 times in a row, no problems. I have seen people jump about 5 feet high, and break several things. I have a rc-solutions roll cage on my t-maxx with flex-tek a-arms, and man can that truck take a beating! I hit everything as hard as possible, and usually come out alive. I highly recomend (like someone else did) is that you start off small. Start off with a little 1 foot (bike skate ramp) and just get used to keeping control in the air, and keeping your speeds consistant. Then work your way up. I have built (and have a how to) for a custom adjustable ramp that you can set the angle and height, and it's a great way to learn. Practice makes perfect. I know people that call pull a backflip or a double and land it 99% of the time, because they know their truck, and have good control. Brian ----------------------------- http://www.BigSquidRC.com For Bashers, By Bashers! |
RE: how big a jump can my monster truck handle
yeah ive been doing small jumps but it keeps stripping the teeth off my diff where the main diff gear runs onto the driveshaft spline part, ive been keeping revs even in mid air so it doesn't graunch when landing, still munched them,
so dunno what to do there turns out my transmission had munched it gear change shaft and made it so it couldn't lock it and just pushed out of the lock in part on the gears which explains the jackhammering of the gear change arm against the servo |
RE: how big a jump can my monster truck handle
well just learnt an expensive lesson, hit my ramp doing about 30mph (50kph) and hit it slighly crooked, smacked it into a tree mid air, my car aint looking too happy :( thatll learn me eh
oh well S**T happens |
RE: how big a jump can my monster truck handle
"learning by doing"..
|
RE: how big a jump can my monster truck handle
ORIGINAL: skidMarkNZ yeah ive been doing small jumps but it keeps stripping the teeth off my diff where the main diff gear runs onto the driveshaft spline part, ive been keeping revs even in mid air so it doesn't graunch when landing, still munched them, so dunno what to do there turns out my transmission had munched it gear change shaft and made it so it couldn't lock it and just pushed out of the lock in part on the gears which explains the jackhammering of the gear change arm against the servo |
RE: how big a jump can my monster truck handle
idk how many of you have seen this one before or not but just a bunch of people out beating up their stuff.... pretty cool when the on road car goes about 30 feet lol.
http://www.youtube.com/watch?v=MRvv8...elated&search= |
RE: how big a jump can my monster truck handle
that was a cool vid, I bet he sold a lot of parts that day:D.
|
RE: how big a jump can my monster truck handle
That video needs a longer intro...:D
|
RE: how big a jump can my monster truck handle
check this out, its crazy. http://www.youtube.com/watch?v=GFOZZLRTaYc
|
RE: how big a jump can my monster truck handle
if he had a bigger ramp it would have been an anlsome stunt!
|
RE: how big a jump can my monster truck handle
what a waste of a copter, what a dick
|
RE: how big a jump can my monster truck handle
Thats had to suck. I know that revo had damage. I havent had a chance to catch my havoc on vid yet but heres someone whos jumping. http://www.youtube.com/watch?v=EIfzK...elated&search=
|
All times are GMT -8. The time now is 07:26 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.