Welcome to the new RC Motorcycle forum!
#26
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Nice Bike Angus, does it go or is it shelved right now??
No sniffing here dude I am ELECTRIFIED!!
Shure the run times suck but I prefer my hearing and brain cells over run time.
Not to mention fingers etc... Gas is just scary, and add the fact I live in an apartment and I am stuck in a wheelchair for life. Gas and me do not mix.[&:]
No sniffing here dude I am ELECTRIFIED!!
Shure the run times suck but I prefer my hearing and brain cells over run time.
Not to mention fingers etc... Gas is just scary, and add the fact I live in an apartment and I am stuck in a wheelchair for life. Gas and me do not mix.[&:]
#27
Junior Member
Join Date: Nov 2003
Location: london, ON, CANADA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I gotta say Ray if I was confined to a wheelchair it would be constructed of titanium and the rear wheels would be driven by a filth spewing 2-stroke engine. I suppose there might be some silly regulation governing the use high powered two stroke engines in apartment buildings but I would not give it up without a fight!!
Perhaps I will get around to finishing the bike this winter but for now it resides on my beer fridge in the garage.
Perhaps I will get around to finishing the bike this winter but for now it resides on my beer fridge in the garage.
![Big Grin](https://www.rcuniverse.com/forum/images/smilies/biggrin.gif)
#28
Senior Member
Join Date: Sep 2003
Location: Milton,
ON, CANADA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
![Big Grin](https://www.rcuniverse.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://www.rcuniverse.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://www.rcuniverse.com/forum/images/smilies/biggrin.gif)
But I'd rather use this old one to Experiment with. Besides No pushin' gives me a big cushion, in MY BELLY, SEXY BELLY!
![Big Grin](https://www.rcuniverse.com/forum/images/smilies/biggrin.gif)
![Big Grin](https://www.rcuniverse.com/forum/images/smilies/biggrin.gif)
#29
Junior Member
Join Date: Oct 2003
Location: Bresso (Milano) - ItaliaMilano, ITALY
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
[font="Verdana"]ciao a tutti i membri del forum... e tanti complimenti ai moderatori..... vi scrivo da Milano, Italia..... seguo sempre questo forum..... ricco di informazioni..... io ed altri amici stiamo montando piano, piano due moto rc 1:5 la honda HONDA RC211V a scoppio e la ducati della TT.... consultiamo spesso questo forum..... ne abbiamo anche uno in italia e vi lascio il link ...... http://www.freeforumzone.it/viewforum.aspx?f=21568......
saluti a tutti
Lorenzo[/font]
saluti a tutti
Lorenzo[/font]
#33
Senior Member
My Feedback: (1)
Join Date: May 2003
Location: Clinton,
NC
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I’ve found one place and one place only that makes a nitro dirt bike. I don’t even have the link anymore nor the phone number I called.
It was a manufacturer in Europe and the price was comparable to the road bikes. The guy told me that the “drive train†was warranted as well as other parts of course but in general, he told me I wouldn’t be happy with it. I was told the bikes were awesome with speed and would fly amazingly high on jumps but every landing resulted in front fork failure. I was told that they made a bike that would withstand punishment but the front didn’t really look like a dirt bike anymore. Too big, too bulky. The guy told me they were working on it but not really. He made a good point in saying “It seems almost impossible to make anything that looks as it should and perform as you would expectâ€.
All that was a few months ago and from searching, he’s apparently right and is the reason you can’t find them anywhere.
It was a manufacturer in Europe and the price was comparable to the road bikes. The guy told me that the “drive train†was warranted as well as other parts of course but in general, he told me I wouldn’t be happy with it. I was told the bikes were awesome with speed and would fly amazingly high on jumps but every landing resulted in front fork failure. I was told that they made a bike that would withstand punishment but the front didn’t really look like a dirt bike anymore. Too big, too bulky. The guy told me they were working on it but not really. He made a good point in saying “It seems almost impossible to make anything that looks as it should and perform as you would expectâ€.
All that was a few months ago and from searching, he’s apparently right and is the reason you can’t find them anywhere.
#34
Junior Member
Join Date: Oct 2003
Location: Athens, GREECE
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
#35
Senior Member
Join Date: Jun 2002
Location: San Jose,
CA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
http://www.rcgroups.com/forums/forum...s=&forumid=183
This is the "MOTHER LOAD" of R/C Motorcycle forums!
This is the "MOTHER LOAD" of R/C Motorcycle forums!
#37
Senior Member
Join Date: Oct 2002
Location: Southwest USA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
First National R/C Motorcycle Championship Race [ 1 ]
It looks like just about everything is confirmed for the First National R/C Motorcycle Championship Race in Las Vegas May 15-16,2004 at the SILVERBOWL which is actually in Henderson Nevada, just outside of Las Vegas. The track's website is www.4acesracing.com
Looks like 3 classes: 1/8 Electric 1/5 Electric and 1/5 Nitro
A practice schedule will soon be made for Saturday May 15th
with the actual races being on Sunday May 16th.
In the next week or two, information will be available at the Racing Association of Motorcycle Modelers website which is www.bikerace.org
There will be Trophies and cash give aways!
There will also be track testing and racing on February 22, 2004 and anybody and everybody is welcome to attend. If you have any questions regarding February 22 at the SILVERBOWL, you can call Richard Taylor ( 4 Aces Club President ) at 702-326-3573
I will post more information as it becomes available. We are currently working on discounted hotel rooms also.
Phil Andreula
Racing Association of Motorcycle Modelers
( Internet-RC Radio Control )
It looks like just about everything is confirmed for the First National R/C Motorcycle Championship Race in Las Vegas May 15-16,2004 at the SILVERBOWL which is actually in Henderson Nevada, just outside of Las Vegas. The track's website is www.4acesracing.com
Looks like 3 classes: 1/8 Electric 1/5 Electric and 1/5 Nitro
A practice schedule will soon be made for Saturday May 15th
with the actual races being on Sunday May 16th.
In the next week or two, information will be available at the Racing Association of Motorcycle Modelers website which is www.bikerace.org
There will be Trophies and cash give aways!
There will also be track testing and racing on February 22, 2004 and anybody and everybody is welcome to attend. If you have any questions regarding February 22 at the SILVERBOWL, you can call Richard Taylor ( 4 Aces Club President ) at 702-326-3573
I will post more information as it becomes available. We are currently working on discounted hotel rooms also.
Phil Andreula
Racing Association of Motorcycle Modelers
( Internet-RC Radio Control )
#38
Junior Member
Join Date: Feb 2004
Location: Burbank,
CA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I just wanted to tell everyone that is into rc bikes that we need to make more people aware that rc bike are alive and alot of fun!!! If we can get more people invloved and create a larger market for them, we have a chance at encouraging companies to produce more bikes and more parts. Would'nt it be cool to walk into a hobby store and see the same amount of parts for our bikes as we do for the T-maxx?
#39
Junior Member
Join Date: Feb 2004
Location: , CA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Hey billyman, I'm new to rc universe, not sure if you got e-mail, but check "nitro motocross" topic in rc motorcycle section.
#40
Junior Member
Join Date: Aug 2004
Location: myrtle beach,
SC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Hey Guy's I just bought the T.T. ducati 999r electric and I've got to say I'm impressed now that I put a Fhantom 13x2 on it with a 2400 mathced pack and Dean's plugs. I still can't get it to do any sort of wheelie action even with the stock pinion {14} I think.Any body got any idea's?
bye the way I think the 1\8 scale kyosho's are awesome in realism.
bye the way I think the 1\8 scale kyosho's are awesome in realism.
#41
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Try an 8-9T motor with stock pinion, stock sprocket and 3300mah batteries. Really power is the big thing here to get wheelies.
Ian
http://rcmcc.tripod.com
Ian
http://rcmcc.tripod.com