old engine
#1
Thread Starter
Senior Member
Joined: Dec 2003
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
From: manchester, , UNITED KINGDOM
Hi i have been having a problem with an old kyosho gt12 engine,i just got it out of the attic (the engine is in the car) i started it drove it and if you put on the throtle too quick it will die and if you slowly put it on and go past the half throtle mark it will stall and it will not idle.
what is wrong help please.
Thanks [&o]
what is wrong help please.
Thanks [&o]
#3
Thread Starter
Senior Member
Joined: Dec 2003
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
From: manchester, , UNITED KINGDOM
hi the engine dose not have a low end just the one main one and idle i have tried differant settings but no look i am running it on model fule (some cheapo brand i thought i would try)
it is 10% nitro but i have some bluethuder 20% for my hyper 7 buggy shall i try that fule in it?
and some one told me to check for air leaks could this be a problem.
Thanks[sm=thumbup.gif]
it is 10% nitro but i have some bluethuder 20% for my hyper 7 buggy shall i try that fule in it?
and some one told me to check for air leaks could this be a problem.
Thanks[sm=thumbup.gif]
#5
Senior Member
My Feedback: (3)
Joined: Jan 2004
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
From: Gretna,
LA
well open your idle to 1 mm when the brakes are applied and on idle and set your other needle flush with te valve stem that should get it? idk about these 2 neddle carbs kinda tricky you would think



