I'm breaking in my new Evader and I have a question......

I am using 20% nitro and I find that when I first ran the motor for a few passes the motor sounded waaaay toooo lean at 2 turns out on the high speed needle.

I had to turn the screw out about another two turns to get it to sound a little rich when I was breaking the motor in.

Is this because I was using 20% instead of 10% nitro???

Let me know because i'm afraid to lean it out until I know i'm not going to damage the motor.

What is everybody's high speed needle setting using 20% with the stock Evader .18 motor????????????

Thanks!!

I don't really know how to help you, but you shouldn't be doing high spees passes during brake in.

watch the start up video and it says 2 turn out but look at the guy doing it he turn it like 3 to 4 times

EVADERSTMAN----Where did I say that I did any "High Speed Passes" ????

I'm just trying to get an idea of what everybody's carb setting are at when using 20% fuel.

I find it hard to believe that nobody know's whan their HS needle settings are.