![]() |
RE: OFFICAL TIPS AND TRICKS THREAD
another for me, and i have seen others copy me at the park.
the tailgate of your truck makes an excellent work bench/pit area. i back right up to where we're driving, it's perfect. i hate kneeling the whole day. |
RE: OFFICAL TIPS AND TRICKS THREAD
tip number 1 tune your carb nice it will save ya
o ya evaderbasher i red your tip nice one |
RE: OFFICAL TIPS AND TRICKS THREAD
There is alot of truth in the words that brownstone speaks. looking around here and see a lot of good ideas. we also use zip ties on our body clips but i just bought the kit from dubro to keep the clips with the body
|
RE: OFFICAL TIPS AND TRICKS THREAD
heres one for ya........ i got tired of my fuel line comming out of my exhaust and then killin the engine ( due to no pressure in the tank) so what i did is took off the pipe and feed the line all the way through the pipe on the line inside the pipe i put an old fuel line fitting inside the line then you pull the fuel line back in like it suppose to be basically wedging the fuel line between the fitting and the pipe so it seals better and also holds the fuel line .............. also the idea about the shock boots really goodbut better yet .... you can also use the fingers off latex gloves .... they tend not to rip like a ballon does
|
RE: OFFICAL TIPS AND TRICKS THREAD
ya you can use anything thing for shock boots i was trying to get people to See the little hole and the top some people probably just learned this and i bet there are a lot of ppl now wit shock boots and it saves ya money because people go buy shocks with shock boots
P.S N E B thx i re did my shock oil i pumped the air out of the shocks |
RE: OFFICAL TIPS AND TRICKS THREAD
There are many ways to make your own shock boots, but they don't look as cool as mine look in my gallery to see them.
|
RE: OFFICAL TIPS AND TRICKS THREAD
What you make yours out of evaderstman?
|
RE: OFFICAL TIPS AND TRICKS THREAD
I bought them from badhorsie.com and i will say for the money they are definatly worth it. They are washable and will last for ever.
|
RE: OFFICAL TIPS AND TRICKS THREAD
1st wat coolinghead is that
2nd what motor 3rdwhat tank i want that tank 4ththaose shok boots look nice but there all for the same purpose it keep grit and grime off shock |
RE: OFFICAL TIPS AND TRICKS THREAD
Now that is sexy right there. (the shock covers)
|
RE: OFFICAL TIPS AND TRICKS THREAD
ok lol..................
|
RE: OFFICAL TIPS AND TRICKS THREAD
3rd page keep them coming
|
RE: OFFICAL TIPS AND TRICKS THREAD
That is the stock engine with the rc10gt fuel tank and stage 2 cooling head. I now run the os .12 cv-r, but don't have a pic of it in there.
*edit* i put in some pics with the new engine. |
RE: OFFICAL TIPS AND TRICKS THREAD
here is another tip if your E clips fall off the hing pins in the front just crunch them down not hard just tight they wont fall off
dont run with out e clips pin slid out of the front half of a arm so all on back hit a pot hole crack dont make my mistake |
RE: OFFICAL TIPS AND TRICKS THREAD
keep them comeing
|
RE: OFFICAL TIPS AND TRICKS THREAD
good forum keep them comeing
|
RE: OFFICAL TIPS AND TRICKS THREAD
OK HERE IS THE BEST TIP OF THEM ALL!!!
.....dont take your nitro for a swim!!! TRUST ME!!! Lol ok here's a more serious one. Lengthen your exhaust to tank tube to 8-10" for better ideling. This was recommended to me by someone else but i noticed a difference. Also, what i have found to work better than CA glue for tires is this silicon glue stuff. You can usually find it at the dollar tree.. its made by "Super Glue" but its called "Fix-All Adhesive". Make sure you get the Adhesive and not the cement. Then smear it around the rim/up on the tire. When it dries it looks fine.. not messy like it origionally looks.. and holds MUCH better than CA glue that ive been using. Oh yeah and another one.. if your breaking that stupid stock antenna tube on your NEVST.. the ones at the LHS.. the black ones.. are taller and reach almost to the end of your wire AND are very flexible/ wont snap.. just bends. They're only about 50 cents or so (if i remember correctly) and are at most LHS's. Ask the guy at the counter for them because they usually ar ebehind the counter in a box and not on display. |
RE: OFFICAL TIPS AND TRICKS THREAD
ya those black one are more flex i know about your motor
yoster here is a tip :D tighten you head bolts and manifold screw get an rc10 gasket for your manifold and trim it to fit better trust me all you need is 1 of those thing they wont blow they strong little things |
RE: OFFICAL TIPS AND TRICKS THREAD
1 Attachment(s)
Heres a little tip for some people
Don't ride a bicycle when the wire mesh in the tires is showing(see pics below) And just so it isn't off topic of R/C, don't jump your car off a cliff withought a camera near by. |
RE: OFFICAL TIPS AND TRICKS THREAD
true, true....
didnt read the thread so not sure if its already been posted but: dont ever prime the engine while the glow ignitor is on the plug.... |
RE: OFFICAL TIPS AND TRICKS THREAD
ive already seen that in the forums that u posted / did it scare you or did it hurt
|
RE: OFFICAL TIPS AND TRICKS THREAD
huh? WTH? i cant understand you... sorry...
|
RE: OFFICAL TIPS AND TRICKS THREAD
what is "hirt"?
|
RE: OFFICAL TIPS AND TRICKS THREAD
yes i was lazy and didnt feel like useing spell check
|
RE: OFFICAL TIPS AND TRICKS THREAD
k ppl ill have the ultimate trick soon i just need to get the Fax's right then ull love it im not going to tell ya yet
|
| All times are GMT -8. The time now is 05:16 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.