tool to keep engine from turning
 

I have an O.S. .18 TZ-TX and am looking for a tool that fits the p3 plug threads to keep the piston from moving..anyone know where I can get one? Thanks.


Dewt.

RE: tool to keep engine from turning
 

Why do you need to keep it from turning? Are you trying to get the clutch nut ff the crankshaft? If you are then you can buy a flywheel tool from duratrax that works just as well.

RE: tool to keep engine from turning
 

Are you sure the threads are different then the regular plugs? [8D]
What are you running the TZ in? I hope to be getting one some. :D
All so how do you like it?

RE: tool to keep engine from turning
 

is this what your looking for ? http://www2.towerhobbies.com/cgi-bin...?&I=LXD567&P=0

RE: tool to keep engine from turning
 

So the thread are the same as that is the one I use in my engines with OS #8 standard plug.

RE: tool to keep engine from turning
 

No turbo and standard plugs use different threads. Here is what you need http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXMW34