factory settings
 

i need help setting my setting back to factory please i am new to the nitro car please help me asap

RE: factory settings
 

helps to know which model
best way is get the instruction manual, and read it. There should be a section (seen it in every manual I have) on the engine, in that section should be something telling you what the factory settings should be, and how to get back to them.
That is the best help I can give you with the little bit of info given.

RE: factory settings
 

What car and engine?As sycho said just check the manual.If you dont have it or cant find it,(Or are just too lazy to look and want us to do all the work) Tell us the car and one of us will either look them up or tell you where to find them.

RE: factory settings
 

it is a nitro x-cellerator 18 engine my dad messed with everything now i cant get it to run or anything

RE: factory settings
 

3 turns out on the hsn and 5 on the lsn;)

RE: factory settings
 

5 out on both and wat about the idle stop screw that is wat i need please

RE: factory settings
 

i mean out on both

RE: factory settings
 

the idle screw should usually be set so there is a 1mm(had a engine that needed a teeny bit more) gap in the carb. One of the few settings I found should be the same engine to engine ;)

RE: factory settings
 

do you now how many turns for the idle stop screw please
<br type="_moz" />

RE: factory settings
 

As SyCo stated, the idle isn't a matter of turns, but opening on the carburator. take the air filter off, then turn clock wise to open the gap or counterclockwise to close it. the thickness of a credit card is .9 to 1mm

RE: factory settings
 

Noooo.3 out on the lsn,5 out on the hsn.Idle should be a 1mm gap.