AirBrush Kit
03-04-2022, 03:37 PM
#3
Alex,
I have used a Paasche double action, internal mix, siphon feed, airbrush it would be great for those Lexan car bodies.
It falls short on the third and larger scale model airplane cowls I wanted to use it for,
I purchased a small touch-up gun from Harbor Freight and it works well on those large cowls, I can get a quality paint job from it!
You can go to the Big Box stores and pickup a small two gallon tanked compressor, I purchased a Husky it even came with
a small brad nailer it will give you all the air you'll need for an airbrush.
Hope this helps,
Bob
I have used a Paasche double action, internal mix, siphon feed, airbrush it would be great for those Lexan car bodies.
It falls short on the third and larger scale model airplane cowls I wanted to use it for,
I purchased a small touch-up gun from Harbor Freight and it works well on those large cowls, I can get a quality paint job from it!
You can go to the Big Box stores and pickup a small two gallon tanked compressor, I purchased a Husky it even came with
a small brad nailer it will give you all the air you'll need for an airbrush.
Hope this helps,
Bob
03-02-2024, 08:49 PM
#5
Junior Member
Join Date: Nov 2023
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Alex,
I have used a Paasche double action, internal mix, siphon feed, airbrush it would be great for those Lexan car bodies.
It falls short on the third and larger scale model airplane cowls I wanted to use it for,
I purchased a small touch-up gun from Harbor Freight and it works well on those large cowls, I can get a quality paint job from it!
You can go to the Big Box stores and pickup a small two gallon tanked compressor, I purchased a Husky it even came with
a small brad nailer it will give you all the air you'll need for an airbrush.
Hope this helps,
Bob
I have used a Paasche double action, internal mix, siphon feed, airbrush it would be great for those Lexan car bodies.
It falls short on the third and larger scale model airplane cowls I wanted to use it for,
I purchased a small touch-up gun from Harbor Freight and it works well on those large cowls, I can get a quality paint job from it!
You can go to the Big Box stores and pickup a small two gallon tanked compressor, I purchased a Husky it even came with
a small brad nailer it will give you all the air you'll need for an airbrush.
Hope this helps,
Bob
