Hi i not new to 3D flying but i am new to pattern flying was wondering if anybody could recomened a good plane (about 60 to 66 In) that will Fly pattern as well as 3D.

Zen 90

Try the Creek Hobbies Quest 3D.

Widebody 60/90 - available as a kit or an ARF. The kit is very easy to build!! The plane flies great!!
-Will

Thanks guys still not shore wot 2 get. the wide boy looks good as well as the Zen. Never seen the creek hobbiesquest 3D do you have a pic. Is it just me or are the zen 50 and above really haevy for their size. keep the ideas coming

Most of the planes suggested so far are quite tricky to buy in the UK, and i know that the Zen series are very highly priced.
The Mk 3D dancer i saw flew very well, but again around £310 from probuild.
The capiche 50 is the best plane i own, and flies 3d and pattern very well for a 50 size plane. In my opinion it has a better feel going from 3d to pattern and vice versa than the 2m ZNline Majestic which i had a go on the other day.
The capiche comes in around 5lbs with a Saito 72 or YS 63, and a good deal lighter with the West 36.
Think its around 58 inch span.
Here are some pics of mine.

Seduction 90

Topflite Cessna 152 Gold Edition

Try the Tai Ji 60, with a 90fx or (even better) a YS 110 this plane is fabulous, a friend of mine is on his second now and I can vouch for it's quality both in terms of the construction and the way it flies. Try Steve Webb for a source.

This same friend is also currently building an Onyx 140 which looks good. There's a few niggling construction issues but nothing too severe and I have heard good things about it's flying performance (it's essentially just a Focus 1 so should be pretty good!). Anyway, it is looking to be good value for money if you want to go up to 2m.

James

Or if you want 3d performance too (just read your original post properly ...) try the ZN Synergy 90. I use this as my back-up pattern model at the comps and it is an awesome performer, and is an exceptional 3D model too. It's a bit more expensive than the Tai Ji but is quite simply the best 90 size model around.

Hi great reply. I all ready fly capiche and love it. i have a irvine 53. i would like somthing maybe a little more on the pattern side of the folder. kepp the ideas coming

We think we can suggest you an excellent pattern flying model, that you also can do 3D flying.
The model is new and its name is EPSILON, it's for 60-90 engines.
Here I'm attaching some pics and you can check the video in the next address:

www.camodel.com.ar/nuevo_epsilon.wmv for Modem56K (1.8mb)
www.camodel.com.ar/epsilon26mb.mpg for Wide Net (26mb)

that an awsome model how much and where can you get it that has got my vote

Peter,
for more information about prices and delivery please contact to CAmodel USA:

Tel.: 305-651-1362
mail: [email protected]
www.camodel.com.ar

Thank you

CAmodel

Ta
What is is like to fly. Have you tried it with a 90 4-stroke maybe a ys 91 or a sito 100