Belcrank on Elevators?
04-09-2006 | 10:11 PM
#1
Belcrank on Elevators?
Is there a 90 size Pattern plane that comes with a belcrank for the Elevator control? Or a single interconnected elevator? Basically I am looking at buying a 90 size bird and useing either a 1.00 2 cycle or a 1.10 ys or Satio 125. Any help on this would be helpfull.
FWIW, I just distroyed my YS63 equiped Aresti and I need a new Pattern plane.
FWIW, I just distroyed my YS63 equiped Aresti and I need a new Pattern plane.
04-10-2006 | 01:45 AM
#2
Member
Joined: Sep 2002
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
From: Bloemfontein, SOUTH AFRICA
RE: Belcrank on Elevators?
Ken,
Have a look at Protech models, their 90 - 120 size 3D / pattern plane called Nemesis. Very nice looking and flying plane that uses a belcrank.
Francois
Have a look at Protech models, their 90 - 120 size 3D / pattern plane called Nemesis. Very nice looking and flying plane that uses a belcrank.
Francois
04-10-2006 | 02:38 AM
#3
Member
Joined: Sep 2004
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
From: , PHILIPPINES
RE: Belcrank on Elevators?
Ken,
World Models sells a pattern plane called a Groovy 90 ARF. This plane has all the things in the box except for the engine and the avionics. The engine mount that come with it is an MK type beam mount while the elevator system is based on the DEPS (dual elevator push/pull system). The flying weight is around 8.5 pounds with a ys 110, and can fly the masters sched.
World Models sells a pattern plane called a Groovy 90 ARF. This plane has all the things in the box except for the engine and the avionics. The engine mount that come with it is an MK type beam mount while the elevator system is based on the DEPS (dual elevator push/pull system). The flying weight is around 8.5 pounds with a ys 110, and can fly the masters sched.
