15.75X10 3-blade prop
05-31-2006 | 09:33 AM
#1
Thread Starter
My Feedback: (18)
Joined: Sep 2003
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
From: Raleigh,
NC
15.75X10 3-blade prop
I'm looking for a 15.75 3-blade repitched to 10 to run on a OS 1.40RX. I believe I heard that Dave Lockhart does it. I can't find anything on the internet to order these. Do you guys know how to get in touch with him to order one?
Thanks,
Rick
Thanks,
Rick
05-31-2006 | 10:16 AM
#2
Senior Member
My Feedback: (16)
Joined: Nov 2002
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
From: N. Charleston,
SC
RE: 15.75X10 3-blade prop
Try getting the info from Bob Pastorello at http://www.rcaerobats.net/ I am sure he has the info you're looking for.
05-31-2006 | 08:55 PM
#4
Senior Member
My Feedback: (25)
Joined: Mar 2002
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
RE: 15.75X10 3-blade prop
Rick,
I'm not sure if Dave sells the repitched 15.75's or not. I know he does the 15's, I have one of those and I actually have been flying the 15.75x11 lately, it seems to be a bit much load for it in the wind. I'll have to fly it more. Are you going to Lake City? Take care.
I'm not sure if Dave sells the repitched 15.75's or not. I know he does the 15's, I have one of those and I actually have been flying the 15.75x11 lately, it seems to be a bit much load for it in the wind. I'll have to fly it more. Are you going to Lake City? Take care.
06-01-2006 | 08:19 AM
#6
RE: 15.75X10 3-blade prop
The "stock" APC sizes for 3 blades are 15x13W, 15x13.5, and 15.75-13 (and I think there is a 13x13 or thereabouts). All can be repitched, the most popular by far is the 15.75 repitched to 10 or 11.
Dave
Dave
