![]() |
(mini) servo gear grease
I was replacing the housings on my Airtronics mini servos and found I had to disassemble the gears and transfer to the new housing. Should I re-grease them, and if so, what's a good grease to use? I have white lithium grease spray, and the Neu motor grease laying around.
By the way, I will think twice before complaining about the cost of these little buggers - lots of precision little gears, precision housings to press-fit hold the pins, an AMD chip for control... Thanks. |
RE: (mini) servo gear grease
I used some white grease i got in a small tube. can't remember the brand name right now. Tower Hobbies also sells Hitec grease.
Hitec part#58450 Tower part#LXN741 kind of pricey though |
RE: (mini) servo gear grease
Dug through the stash.
Woodland Scenics White Grease with Teflon Part#HL657 Tower#LXKR90 Usually find it by the trains in a hobby shop if any are left. Other then that a white lithium grease would work fine |
RE: (mini) servo gear grease
ORIGINAL: d_bodary I used some white grease i got in a small tube. can't remember the brand name right now. Tower Hobbies also sells Hitec grease. Hitec part#58450 Tower part#LXN741 kind of pricey though Larry Diamond |
| All times are GMT -8. The time now is 06:02 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.