RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Pattern Flying (https://www.rcuniverse.com/forum/rc-pattern-flying-101/)
-   -   pattern arf (https://www.rcuniverse.com/forum/rc-pattern-flying-101/1262767-pattern-arf.html)

Jim Oliver 11-08-2003 11:49 PM

pattern arf
 
Hi,
Do any of you know anything about an older ARF (by E-Z I think) called "MYSTIC 90"?

This particular model is about 55 1/2 in. LOA, with about 61 1/2 in. span, with retracts, tail wheel configuration and appears to be a frame work with some sort of white foam skin wrapped around the frame (fuse and flying surfaces). The skin seems to have graphics printed onto the surface with some sort of clear finish.

Any info would be appreciated.

gregusan 12-14-2003 07:11 PM

RE: pattern arf
 
Do a search for this. Someone else shows a pic of one, and mentions a 1993 Hobby Shack catalogue.
I have an EZ Mystic 30 ARF, which is similar, but different colors and graphics. About 48" span. These were designed by the Austrian champ, Hanno Prettner.

Construction is typical EZ type, which you can still find on certain ARF's today.

Let me know if you find any info on the Mystic 30, as I need to know the balance point for mine. Thanks!

Jim Oliver 12-14-2003 08:23 PM

RE: pattern arf
 
Hi,
Don't have balance point for Mystic 90 handy right now; could probably dig it up--percentage wise, it might give you a starting point.

gregusan 12-15-2003 12:33 AM

RE: pattern arf
 
If you find it, that would be helpfull. If you could, tell me what the wing cord is at the balance point as well, and if it's where the wing meets the fuselage. Then I can calculate percentage. Thanks!


All times are GMT -8. The time now is 03:03 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.