RCU Forums - CAPRISE CG

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Pattern Flying (https://www.rcuniverse.com/forum/rc-pattern-flying-101/)

- - CAPRISE CG (https://www.rcuniverse.com/forum/rc-pattern-flying-101/1980627-caprise-cg.html)

PATTERNPATTERN

07-11-2004 04:36 PM

CAPRISE CG

Anyone know where the centre of gravity should be on a zn line caprise.

Schpankme

07-11-2004 06:31 PM

RE: CAPRISE CG

Searching the Archives shows - if your wing chord root is 450mm - then the CG setting is 180mm from the leading edge.

ZN seems to stick their CG locations all about the same spot.....
Fashion, Caprise, Alliance, Synergy, Hydeaway all have the CG about in this location - "tnewman"

http://www.rcuniverse.com/forum/m_11...tm.htm#1139496

__________
Schpankme

Rune	07-11-2004 07:19 PM

RE: CAPRISE CG

1 Attachment(s)

hello!
all velcome to to correct me!
before ...15 years ago..we always belive the CG to be 33% of the lenght off the wingcord from front at the middel off the wing .?
did i explain unclear?

All times are GMT -8. The time now is 04:38 PM.