RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Pattern Flying (https://www.rcuniverse.com/forum/rc-pattern-flying-101/)
-   -   Pattern plane for a 4 stroke 1.20 (https://www.rcuniverse.com/forum/rc-pattern-flying-101/3365198-pattern-plane-4-stroke-1-20-a.html)

kregan 09-16-2005 04:15 PM

Pattern plane for a 4 stroke 1.20
 
A friend of mine at the field gave me a OS 1.20 Surpass 4
stroke that needs bearings. I have ordered the bearings
and I was thinking about a Pattern aircraft.

Right now I am flying a 50cc Wild Hare Extra. Mostly basic/sportsman
style IMAC flying. I used to be crazy for 3D, but in my opinion the planes
look nicer flying a sequence.

I would like a kit and have looked at the CA Epsilon or Wide Body 60.
I would like something under $300.00 US if that is possible?
Any help in this area would be appreciated.

I also want a war bird some time and had thought about a Focke Wulf FW190D9...
I have heard the long nose 190's fly similar to a pattern plane? Is that true?

Thanks again for the help.

snap_roll 09-16-2005 10:15 PM

RE: Pattern plane for a 4 stroke 1.20
 
warbirds at some point,cant do pattern manuveurs,a GSP swallow or excelleron 90 will be a good choice for ur engine;)

kregan 09-19-2005 06:12 PM

RE: Pattern plane for a 4 stroke 1.20
 
Thank you for the help....

To be honest I am suprised that more pattern people did not chime in.

Again thanks for the help.



ORIGINAL: snap_roll

warbirds at some point,cant do pattern manuveurs,a GSP swallow or excelleron 90 will be a good choice for ur engine;)

flyintexan 09-19-2005 07:01 PM

RE: Pattern plane for a 4 stroke 1.20
 
If you don't mind building, the widebody is the way to go....it can be built light and performs very, very well.

kregan 09-19-2005 08:20 PM

RE: Pattern plane for a 4 stroke 1.20
 
No problem at all with building, working on a Patriot Speed plane now. My wife
gave me the kit last year so I thought it would be a good idea to work on it!

Can you guys explain the difference between the Exeleron and the Wide Body 60?
Also isn't the Wide body 60 a little small for the 1.20 4 stroke?

I sold my profile Yak today and now have a Ervine 53 2 stroke that would be great
in a Wide body 40!

Thanks for the help.




flyintexan 09-19-2005 08:51 PM

RE: Pattern plane for a 4 stroke 1.20
 
The excelleron (as far as I know) will be a bit heavier RTF than the widebody. Alot of guys are flying the WB on YS110's, so I don't think your OS120 is a real stretch...however, it may be heavier than the YS, so be prepared to mount an aft rudder servo or something similar to prevent adding tail weight...

I have seen the OS120 on a GSP Swallow and it flew quite well but really labored through the intermediate sequence.....o.k. for the Sportsman though....

Erik Johansson 09-20-2005 12:28 AM

RE: Pattern plane for a 4 stroke 1.20
 
I´d go for the Epsilon. I just got it myself (not sure when I´ll build it though, but it was on sale locally...) and it´s a bit more modern than the WB60 with more fuselage volume and a redesigned wing for better snaps. I plan to downsize the ailerons and elevator a bit on mine to make it even better for pure pattern style flying. I´ve seen that some people have done this to the WB60 as well.

Also, all the flying qualities aside, the Epsilon just looks so much better. :)

/Erik

the_madgenius 09-20-2005 03:22 AM

RE: Pattern plane for a 4 stroke 1.20
 
advent, i cant make comparison between the widebody and excelleron, as i haven't flown the widebody, but i do have the excelleron90 . As a pattern ship, i cant fault it even though mine is powered only with a 90 2stroke. The bank ballance at the time couldn.t go for a 120 4stroke. but i do believe with a 120 up front your pattern flying would be exceptional, the greater torque of the 4stroke over the 2stroke would make a world of difference. The Excelleron is precision par excellence.
Happy flying , the-madgenius.

kregan 09-20-2005 07:29 AM

RE: Pattern plane for a 4 stroke 1.20
 
Sorry guy, I meant to say the Epsilon, not the Exceleron.




ORIGINAL: Advent

No problem at all with building, working on a Patriot Speed plane now. My wife
gave me the kit last year so I thought it would be a good idea to work on it!

Can you guys explain the difference between the Exeleron and the Wide Body 60?
Also isn't the Wide body 60 a little small for the 1.20 4 stroke?

I sold my profile Yak today and now have a Ervine 53 2 stroke that would be great
in a Wide body 40!

Thanks for the help.





kregan 09-20-2005 07:36 AM

RE: Pattern plane for a 4 stroke 1.20
 
I can't seem to find the Exceleron on the web.
Who sells them?

Robert Bauer 09-20-2005 09:48 AM

RE: Pattern plane for a 4 stroke 1.20
 
Tuesday, September 20, 2005
7:44:59 AM Pacific Time
Search Quick Links ---------------- Hobby People Home Page Cars & Trucks Car & Truck Parts Planes & Helis Plane & Heli Parts Engines & Accys Radios & Accys Boats Plastic Models Die-Cast Models Train Sets Toys Tools & Supplies Books & Videos Slot Cars ---------------- Hop-Ups Parts Listing Manufacturer Listing Product Listing ---------------- New Items Sale Items Store Locations




Excelleron 90 does it all. It’s the ideal ARF for freestyle aerobatic, F3A pattern, or “artistic aerobatic” competitions. Perfectly matched with the Magnum 91 four stroke. It'll achieve awesome vertical performance with the Magnum 1.20 four stroke. You’ll enjoy this masterful, “excellerated” design.

Useful Links
More Information

All Sportsman Aviat Products
Download the instruction manual for this item (1,448K) in Adobe PDF format.
Replacement Parts
Other Items Needed



Order No. Mfr No. Description Status Cart Price
127565 06020 Sportsman Aviat Excelleron 90 ARF Aerobatic In Stock 279.99

Order it in a Combo!
Sportsman Excelleron 90 + Magnum Xl 91 Rfs
Sportsman Excelleron 90 + Magnum XLS 91


Want to Order by Phone? 1-800-854-8471 Foreign Orders call 714-963-9881
Some items limited to stock on hand
Prices, availability, & specifications are subject to change without notice.
Hobby People is not responsible for inadvertent errors to these pages.
© Copyright Hobby People


All times are GMT -8. The time now is 10:30 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.