RE: Black Magic v2 builder's thread! *Updated*
 

Good idea though, I know that a lot of people like to honeycomb the wings, to reduce the moment on inertia on pattern wings.

Having a look through the pics again, I notice that the section seems to be really thin, apart from the 1/4" x 1/8" wood spars have you considered inlaying carbon rods?

"it's an inanimate carbon rod!"

RE: Black Magic v2 builder's thread! *Updated*
 

Nope because it's not necessary. A couple pieces of spruce and a couple pieces of balsa/carbon/balsa and this thing will hold up to just about anything (except a van door, don't ask......)

If I haven't managed to break a wing ,and Emory (Mr. High Energy Snap) hasn't managed to break one, I'm inclined to think they're maybe even overkilled. But since the weight and effort is negligable, I'll leave them as is.

-Mike

RE: Black Magic v2 builder's thread! *Updated*
 

I can tell you that the way Mike builds a wing is very strong. After having my 1st Black Magic crash, I wanted to see how strong the wing was. I broke it over my knee. To my surprise, it took several times to actually break it. And, I do like to snap a lot when flying and they seem to hold up to that so far:D

Emory.

RE: Black Magic v2 builder's thread! *Updated*
 

I got my wings sheeted yesterday an installed the wing tubes an said to my self lets see how they look an when I put the wings an stab on an steped back, I said to my self " DAM thats thing is big"

RE: Black Magic v2 builder's thread! *Updated*
 

Yeah, just wait until you try and fit it in your car! I had to rethink my method of transport.

Emory.

RE: Black Magic v2 builder's thread! *Updated*
 

Along with my Black Magic I am building a couple Daddy Rabbits an I would like to buy the Pull-Pull cable in a roll. Anybody know were it can be bought like that, in a roll?

RE: Black Magic v2 builder's thread! *Updated*
 

As close as your local sporting goods store under fishing line.

RE: Black Magic v2 builder's thread! *Updated*
 

I have looked at every fishing store in Alabama with no results. Maybe on the East Coast were the fish have teeth

RE: Black Magic v2 builder's thread! *Updated*
 

Guess we just have meaner fish. :)

I look for steel leader line.

RE: Black Magic v2 builder's thread! *Updated*
 

does anyone have a spare set of bm wings i have a friend that could use a pair!!!!!!!!!!!!!!!


gary

RE: Black Magic v2 builder's thread! *Updated*
 

Initials MH?

RE: Black Magic v2 builder's thread! *Updated*
 

far be it for me to name names

gary

RE: Black Magic v2 builder's thread! *Updated*
 

Yeah yeah yeah!!! Well, they were at least still hanging on the wall when I got home. I needed to change the aileron servos anyway.

[8D]

-Mike

RE: Black Magic v2 builder's thread! *Updated*
 

Centreal Hobbies said it was there mistake, Just for peace of mind Mike do you think the mounting holes willl match up. How did thta pilot make out with the borrowed plane an were are the AMA scores posted?

RE: Black Magic v2 builder's thread! *Updated*
 

yes the mounting holes should be the same. be glad you haven't glued the cowl though, as it can slightly tweak the thrust from one mount to the next. Just build it like it is.

So which one did they send you? That was the ugliest hyde mount I've ever seen....I've never seen the nose ring mounted like that!

I got second, actually managed to win 2 rounds. It was really challenging and fun. I bet I never forget my wings again though....

-Mike

RE: Black Magic v2 builder's thread! *Updated*
 

A YS-140

RE: Black Magic v2 builder's thread! *Updated*
 

Doe's anybody know if YS has a Web site like O.S. has. Would like to know the engine length's specs. The O.S 140 is 4.13

RE: Black Magic v2 builder's thread! *Updated*
 

Can you publish your I'm going to a pattern contest check list Mike so those of us with a forgetfull nature can be helped?



LOL
gary

RE: Black Magic v2 builder's thread! *Updated*
 

Hey Mike,

How about leaving the wings in the car..lol.. or do we need to tie a string on your finger to remember the list..:)


Good talking with you today.. looking forward to my trip down for slave labor..lol


scott anderson

RE: Black Magic v2 builder's thread! *Updated*
 

WCornelius,

Try [link=http://www.yspower.co.jp/index.html]YSPOWER[/link]

Dz160 English "manual" [link=http://www.yspower.co.jp/pdf/DZ160-E.pdf]Here[/link]
and Dz140 [link=http://www.yspower.co.jp/pdf/DZ140-E.pdf]Here[/link]

RE: Black Magic v2 builder's thread! *Updated*
 

which of the two would you use for the BM. I,ve used both with good results. The Robart have good holding power using monkey grip but the Radio South hinges allow for sealing the aili real tight Any sugestions before I slot the T E an L E.

RE: Black Magic v2 builder's thread! *Updated*
 

x

RE: Black Magic v2 builder's thread! *Updated*
 

Here's what they look like.

RE: Black Magic v2 builder's thread! *Updated*
 

Radio south, no question. Think light.

-Mike

RE: Black Magic v2 builder's thread! *Updated*
 

Mike,
Sounds like you forgot something... Bummer. Hey, I forgot my radio once. Just ran down to the field for some quick practice and when I got there - dammit! Anyway, the wood is on the way, the bench should be clear real soon. Last D1 contest is this weekend. Time for some Black Magic, baby! I'll send some pic's as the work progresses. Scott Smith and I are trying to come up with a way to vacuum bag the honey-combed wings. Scott uses a different method that shouldn't crush the cores. We're going to make some test pieces and try them before we put the good stuff into the bagger. I'll let you know how that works.
How's that YS running for you? Has anyone set up a Black Magic with an OS 160 yet? If they have, I'd be interested in some pic's. I hope fitting the header doesn't require shredding up the cowl.

John Pavlick