RCU Forums - Excelleron 90 need info

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Pattern Flying (https://www.rcuniverse.com/forum/rc-pattern-flying-101/)

- - Excelleron 90 need info (https://www.rcuniverse.com/forum/rc-pattern-flying-101/6234715-excelleron-90-need-info.html)

fastplane

08-13-2007 08:18 PM

Excelleron 90 need info

I have an Excelleron 90 from an friend but need some info on it. The plane had been flown and is in excellent condition.
I will be using a Saito 125. I do not have any manual or other data for it.
What are the recommended control throws?
What is the recommended CG settings for the plane?
Anything else I need to know?
Thanks

Jeff_edge540

08-13-2007 09:08 PM

RE: Excelleron 90 need info

Start reading ;)
http://www.rcuniverse.com/forum/m_23...elleron/tm.htm

MikeRuth

08-13-2007 09:52 PM

RE: Excelleron 90 need info

That's a lot of reading, and I have read it all. LOL

7 1/2" is the CG most people like on this plane.

As for the control throws, I think about 10MM up and down are good for the ailerons and elevator and some more on the rudder.

If I get a chance I'll measure mine and let you know if you don't get it in the air first.

Great plane, what engine did you get/put in it.

Mike

All times are GMT -8. The time now is 09:55 PM.