Jeti DC 24 no operate on P2
03-07-2021, 02:28 PM
#1
Thread Starter
Join Date: Jul 2007
Location: Auckland, NEW ZEALAND
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Jeti DC 24 no operate on P2
My Jeti DC 24 has developed a problem on P2 the throttle control.
Checking view inputs P@ is showing as working, but when connected to a receiver such as channel 1
no movement of the output shows on the receiver setup screen.
Checking another servo channel the same problem no movement when P2 is operated.
All other channels are working perfectly.
Ideas please as to what to check, and get the DC 24 working again, its summer and I want to go flying
Thanks Ross
Checking view inputs P@ is showing as working, but when connected to a receiver such as channel 1
no movement of the output shows on the receiver setup screen.
Checking another servo channel the same problem no movement when P2 is operated.
All other channels are working perfectly.
Ideas please as to what to check, and get the DC 24 working again, its summer and I want to go flying
Thanks Ross
Last edited by zl1wn; 03-07-2021 at 02:35 PM.
03-11-2021, 08:59 AM
#2
My Jeti DC 24 has developed a problem on P2 the throttle control.
Checking view inputs P@ is showing as working, but when connected to a receiver such as channel 1
no movement of the output shows on the receiver setup screen.
Checking another servo channel the same problem no movement when P2 is operated.
All other channels are working perfectly.
Ideas please as to what to check, and get the DC 24 working again, its summer and I want to go flying
Thanks Ross
Checking view inputs P@ is showing as working, but when connected to a receiver such as channel 1
no movement of the output shows on the receiver setup screen.
Checking another servo channel the same problem no movement when P2 is operated.
All other channels are working perfectly.
Ideas please as to what to check, and get the DC 24 working again, its summer and I want to go flying
Thanks Ross
