Vanquish VS4-10 FREEDOM83
#1
Thread Starter
Vanquish VS4-10 FREEDOM83
Well, bought from JSCALE on day 1, day 10 arrived from Belgium to Vitoria (Spain)
I leave photos of the assembly, although it is the same for everyone, add that in my case I have not seen any problem or problem, very charming with this car.
Front axle
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Rear axle
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Another detail, the internal bearing of the spool, fatter than the others
by https://www.flickr.com/photos/126459290@N04/, en Flickr
I love these details, corrected problems included in the KIT, not to buy separately, note RC4WD:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Another great detail, for those who doubt how to fit the spool, two washers say the instructions and two carries, the two that includes half of the uni-joint in the bag.
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Chassis , here I have to add that I was very surprised, and the finish that is spectacular as everything, if not the weight, weighs as much as a modelex chassis, in case anyone had doubts about it when seeing plastic .
And by the way, I recommend doing the chassis step with electric screwdriver hehehehe
by https://www.flickr.com/photos/126459290@N04/, en Flickr
links
by https://www.flickr.com/photos/126459290@N04/, en Flickr
now the marriage of everything , inner fenders painted in matt black
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Until here came the work of Tuesday, I will immediately put the work of Wednesday
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
I leave photos of the assembly, although it is the same for everyone, add that in my case I have not seen any problem or problem, very charming with this car.
Front axle
Rear axle
Another detail, the internal bearing of the spool, fatter than the others
I love these details, corrected problems included in the KIT, not to buy separately, note RC4WD:
Another great detail, for those who doubt how to fit the spool, two washers say the instructions and two carries, the two that includes half of the uni-joint in the bag.
Chassis , here I have to add that I was very surprised, and the finish that is spectacular as everything, if not the weight, weighs as much as a modelex chassis, in case anyone had doubts about it when seeing plastic .
And by the way, I recommend doing the chassis step with electric screwdriver hehehehe
links
now the marriage of everything , inner fenders painted in matt black
Until here came the work of Tuesday, I will immediately put the work of Wednesday
The following users liked this post:
jnayjaso (04-05-2020)
#2
Thread Starter
Now the work of Wednesday, bodywork :
first , silver
by https://www.flickr.com/photos/126459290@N04/, en Flickr
second , blue
by https://www.flickr.com/photos/126459290@N04/, en Flickr
third, black, inside normal, and matt outside
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Sticker pack :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
While the body is drying, I get the inside, black inside and the back box in matt
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Front grille :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Color line :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Body nbear finish , waiting for SCOUT ornaments
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
This weekend I attended a hangout, and took the opportunity to buy some deep dish to mount the 1.7 bogger.
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
These rubbers are for mud and sand, for rock I will put othe
first , silver
second , blue
third, black, inside normal, and matt outside
Sticker pack :
While the body is drying, I get the inside, black inside and the back box in matt
Front grille :
Color line :
Body nbear finish , waiting for SCOUT ornaments
This weekend I attended a hangout, and took the opportunity to buy some deep dish to mount the 1.7 bogger.
These rubbers are for mud and sand, for rock I will put othe
The following users liked this post:
jnayjaso (04-05-2020)
#3
Thread Starter
Finally, after more than 20 days waiting for the OVERDRIVE arrived, thanks to the wonderful customs of our country, I have to pay 27€ more, apart from the 52$ of the order including shipping , in this country like to steal, in sight this
For the rest of the genius, as in each step, the quality in the KIT is noticed, nothing to do with anything else on the market the truth is told
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Now waiting for electronics ...
For the rest of the genius, as in each step, the quality in the KIT is noticed, nothing to do with anything else on the market the truth is told
Now waiting for electronics ...
The following users liked this post:
jnayjaso (04-05-2020)
#4
Thread Starter
It is a pleasure to have a store next to home (TeamTracker) . Hudy horn low profile & servo Corally :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
The reel hits the panhard if you ride it forward, if you put it back with the upper link support.I put it back because it asks for less elevation, and with some caps it is in place
by https://www.flickr.com/photos/126459290@N04/, en Flickr
The reel hits the panhard if you ride it forward, if you put it back with the upper link support.I put it back because it asks for less elevation, and with some caps it is in place
The following users liked this post:
jnayjaso (04-05-2020)
#5
Thread Starter
Some videos of yesterday at home, testing angles to see if you need weights or not, at the moment I do not think, to see in the field climbing that such is behaved, moemnto, everything works ek jejjeje
https://www.youtube.com/watch?v=zAJt-6goIfU
[youtube]zAJt-6goIfU[/youtube]
https://www.youtube.com/watch?v=opOVyPE5N9w
[youtube]opOVyPE5N9w[/youtube]
https://www.youtube.com/watch?v=zAJt-6goIfU
https://www.youtube.com/watch?v=opOVyPE5N9w
The following users liked this post:
jnayjaso (04-05-2020)
#6
Thread Starter
photos of emblems
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
The following users liked this post:
jnayjaso (04-05-2020)
#7
Thread Starter
Well, because of quarantine and with teleworking, I take the opportunity to do the installation although even with the provisional esc and motor:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And cable ties, which comes with the Axial kit:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And cable ties, which comes with the Axial kit:
The following users liked this post:
jnayjaso (04-05-2020)
#8
Thread Starter
detailing a little bit headlights and rear tail lights :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Now yes, I have already got another set of rims for the bogger 1.7 tires, so I have these for sand and mud and the DeepDish with the RockBeast for rocka and others.
Thanks to RTRValladolid, ordered on Thursday at 12 and received on Friday at 9:30, EFFICIENCY
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Now yes, I have already got another set of rims for the bogger 1.7 tires, so I have these for sand and mud and the DeepDish with the RockBeast for rocka and others.
Thanks to RTRValladolid, ordered on Thursday at 12 and received on Friday at 9:30, EFFICIENCY
#10
Thread Starter
Thanks for my friend Miguel ,and thingiverse parts mate !!! saturday will be to test outdoor :
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
#11
Thread Starter
More things are coming, some bars of Shapeways Knigth Customs, good packaging, fast and a quality that I have freaked out:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
It is hard to see the 3D lines:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Here where they are most seen:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
A photo next to Miguel's pieces already painted in black with a medium rough matte antigravel, the bars I have not painted come as is:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
Some original Changquish hahaha from rtrvalladolid:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
and to the direct paint booth, same color as the bodywork:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And some photos in the cabin, without flash and with flash:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
and more or less ... this is how:
by https://www.flickr.com/photos/126459290@N04/, en Flickr
It is hard to see the 3D lines:
Here where they are most seen:
A photo next to Miguel's pieces already painted in black with a medium rough matte antigravel, the bars I have not painted come as is:
Some original Changquish hahaha from rtrvalladolid:
and to the direct paint booth, same color as the bodywork:
And some photos in the cabin, without flash and with flash:
and more or less ... this is how:
#12
Thread Starter
Well there they are, many screws and as expected, the small screws do not know which key to choose hahahaha
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And now in the car with a 1.9 pitbull rock beast and shapeways knight customs bars
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
And now in the car with a 1.9 pitbull rock beast and shapeways knight customs bars
#13
Thread Starter
Thanks the mate from thingiverse !!!!
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
#14
Thread Starter
Released !!
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
by https://www.flickr.com/photos/126459290@N04/, en Flickr
#15
Thread Starter
More photos of this saturday :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
#16
Thread Starter
The order of FANATICRC arrives and as a gift, MASK !! hehehehe original and practical !!
by https://www.flickr.com/photos/126459290@N04/, on Flickr
It is already put, now to fight with the servo and the transmiter hehehehe
by https://www.flickr.com/photos/126459290@N04/, on Flickr
It is already put, now to fight with the servo and the transmiter hehehehe
#17
Thread Starter
Saturday route for the river , nice site , kurutzebarri , Spain "thumbsup"
[youtube]jAyZPou8L5g[/youtube]
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
[youtube]jAyZPou8L5g[/youtube]
#18
Thread Starter
NWE TIRES here we go :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
OEM vs dual stage :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
Before :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
After :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by [url=https://www.flickr.com/photos/126459290@N04/]alberto
OEM vs dual stage :
Before :
After :
#19
Thread Starter
New tires & foams test :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
Another vacation route :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
Some stuff more & testing sway bar :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
Another vacation route :
Some stuff more & testing sway bar :
#20
Thread Starter
And the last mod , new body MST JP1 with Vanquish ripper bumper for scx10-2 with 1" led bar vanquish , new chanquish rims with brass :
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
#21
Thread Starter
Sunday photos in Baltzola cave
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
#22
Thread Starter
The OEM fenders began to have some slit and also, with the 120mm and now that the body is lowered more, they rubbed a bit, the first photo with the series ones, the rest with those of an old axial body, just like the interior that has also been worth it. I will use the bars of the body to make the original body convertible and what has been left, I think some would decorate a wraith or something similar, 100% recycling lo
#23
Thread Starter
saturday photos
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
by https://www.flickr.com/photos/126459290@N04/, on Flickr
#24
Thread Starter
#25
Thread Starter