Prototype Xtreme RC Racing TLT chassis
04-18-2007, 05:19 PM
#1
Senior Member
Thread Starter
Join Date: May 2004
Location: , GA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Prototype Xtreme RC Racing TLT chassis
The chassis is designed around RC4WD's R2 transmission.
I also used Fat-Rock Axle-Cs as well as a Fat-Rock front battery/servo mount.
It's at a 13" wheelbase as you see it in the pics - plenty of tuning/setup left to do.
I also used Fat-Rock Axle-Cs as well as a Fat-Rock front battery/servo mount.
It's at a 13" wheelbase as you see it in the pics - plenty of tuning/setup left to do.
04-18-2007, 07:16 PM
#2
Junior Member
Join Date: Apr 2007
Location: chula vista, CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
RE: Prototype Xtreme RC Racing TLT chassis
Very nice. What kinda material is it made of? Is it for personal use or for sale eventually? Post more picture when all complete and hopefully a video in action.
04-19-2007, 10:05 PM
#4
Senior Member
Thread Starter
Join Date: May 2004
Location: , GA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
RE: Prototype Xtreme RC Racing TLT chassis
This is one of one for now. A prototype to mess with.
This chassis is made from G10, if it goes into production the production versions will be made from carbon fiber.
Messed with it a bit tonight.
Tore the chassis apart and drilled new holes for the front upper links. Figured I'd do the same for the rear. I need to move the rear upper link mount from where you see it in the pics.
Installed a tranny with motor, servo (linkage isn't hooked up yet), and 8 cell 2/3A pack from thecrawlerstore.com.
Shots:
So far I can see a couple of things that need to be changed but nothing major.
This chassis is made from G10, if it goes into production the production versions will be made from carbon fiber.
Messed with it a bit tonight.
Tore the chassis apart and drilled new holes for the front upper links. Figured I'd do the same for the rear. I need to move the rear upper link mount from where you see it in the pics.
Installed a tranny with motor, servo (linkage isn't hooked up yet), and 8 cell 2/3A pack from thecrawlerstore.com.
Shots:
So far I can see a couple of things that need to be changed but nothing major.
05-04-2007, 10:37 AM
#5
Senior Member
Join Date: Dec 2005
Location: santa rosaamerica
Posts: 1,218
Likes: 0
Received 0 Likes
on
0 Posts
RE: Prototype Xtreme RC Racing TLT chassis
One of the coolest chassis i have ever seen. It reminds me of an sw2, but it is like a tuber too, because it doesnt need a body, I would love to have a chassis like that, keep us updated, and Video too. Very nice job, and innovative thinking!!
