Expert Electronics SL800 Servo
01-08-2004 | 02:46 PM
#1
Thread Starter
Member
Joined: Dec 2003
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
From: RIchmond, VA
Expert Electronics SL800 Servo
I am building a 87" Stearmen and found in my drawer of servos 2 Expert Electronics servos, but they do not have any spec's writen on the case. I think the torque is in the neighborhood of around 180 oz/in, @ 4.8 volts. If any one could tell me the torque specs I would be greatful. Thanks
01-12-2004 | 09:49 AM
#2
Thread Starter
Member
Joined: Dec 2003
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
From: RIchmond, VA
RE: Expert Electronics SL800 Servo
For everyone's information I found the specs and thought that I would share them with everyone. They are as follows:
SL800 Giant BB Servo
Specifications (4.8)
Length .................. 2.48"
Width ................... 1.26"
Height ................... 2.46"
Torque .................. 173 oz/in
Torque @ 6.0v ....... 216 oz/in
Speed ................... .29sec/60 deg.
Weight .................. 5.12 oz.
Voltage ................. 4.8v - 6.0v
Universal connector polarity White (signal) Red (+) Black (-)
SL800 Giant BB Servo
Specifications (4.8)
Length .................. 2.48"
Width ................... 1.26"
Height ................... 2.46"
Torque .................. 173 oz/in
Torque @ 6.0v ....... 216 oz/in
Speed ................... .29sec/60 deg.
Weight .................. 5.12 oz.
Voltage ................. 4.8v - 6.0v
Universal connector polarity White (signal) Red (+) Black (-)
