running gear setup
#1
Junior Member
Thread Starter
Join Date: Feb 2011
Location: , NEW ZEALAND
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
running gear setup
Hi, i have purchased the following equipment for my rc warship HMNZSOTAGO:
Lead Acid Battery 12V 10AH - Gell Cell
Graupner Bow Thruster (1785)
2x Graupner Speed 500E (1788)
3x Mtroniks Viper Marine 20
Futaba 4EA raido with 3 x 3003 servo
would anyone be able to help me with the way in which to set it up and or is there any other gear i require to do this.
i would like : independent motors
: bow thruster
: steering
Cheers
#2
Join Date: Jul 2007
Location: Blackpool Lancs, UNITED KINGDOM
Posts: 1,432
Likes: 0
Received 32 Likes
on
32 Posts
RE: running gear setup
The Graupner bow thrusters that I have seen are fitted with a 7.2 volt motor. Run on 12 volts either the motor or the drive will soon suffer, so either change out the motor to a higher voltage version, or run on a separate battery, or calculate a suitable series resistor to calm it down. Thrusters tend to not be the most accessible items for servicing, so making sure that they have a long life is a good idea.