My Tiger 1 tank build
#1
Junior Member
Thread Starter
Join Date: Jan 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
My Tiger 1 tank build
Thought I would post just to give some ideas to other builders, my Tank is a Heng Long Tiger 1 with metal tracks and gears
Threw out the rc boards and installed a flysky fs-i6 receiver,
left joystick moves turret left/right and gun up/down (using servo controllers taken from 45g continuous rotation servos to drive original motors)
right joystick - elevon channel mix for directions using two ESC 320A works well (stopping to reverse but guess that would be normal in real tank too)
Switch A fires the gun (using 9g servo controller board with 5v relay module)
Switch B plays audio track with dfplayer module (using 9g servo controller board)
Working really well but now need to tidy up the mess of wires
Threw out the rc boards and installed a flysky fs-i6 receiver,
left joystick moves turret left/right and gun up/down (using servo controllers taken from 45g continuous rotation servos to drive original motors)
right joystick - elevon channel mix for directions using two ESC 320A works well (stopping to reverse but guess that would be normal in real tank too)
Switch A fires the gun (using 9g servo controller board with 5v relay module)
Switch B plays audio track with dfplayer module (using 9g servo controller board)
Working really well but now need to tidy up the mess of wires
Last edited by Timbat; 01-15-2018 at 05:07 AM.